Manual Parkside IAN 275082 PHD 100 E2 (page 8 of 76) (English, German, Dutch, Danish, French)

745531

Zoom out

Zoom in

1/76

GB IE

placement parts authorised by

the manufacturer.

Electrical safety:

Caution: to avoid accidents

and injuries from electric

shocks:

• The plug and socket of an

extension cable must be water-

tight!

Unsuitable extension cables

can be dangerous as people

can be harmed by an electric

shock!

• Protect the electric plug connec-

tions against moisture.

• If there is a risk of ooding, x

the plug connections in an area

that is safe from ooding.

• Ensure that the mains voltage

matches the specications on

the rating plate.

• The electrical installation shall

be according to national wiring

rules.

• Connection to the mains must

be carried out by an experi-

enced electrician and meet the

requirements of IEC60364-1.

• The device must only be con-

nected to a mains socket via a

residual-current circuit breaker

(RCD) with a rated leakage cur-

rent of not more than 30mA.

Fuse: at least 13 ampere.

• Before each use, check the

equipment, cable and plug for

damage.

• If the power cable for this

equipment is damaged, it must

electrical protection measures

are in place.

• Never operate the pressure

washer if the power supply

cable or other important parts,

such as the high-pressure hose

or the gun, are damaged.

• Protect the pressure washer

from frost and dry running.

• Use only original accessories

and do not carry out conversion

work on the equipment.

• Please read the notes in the op-

erating instructions on the topic

of “maintenance and cleaning”.

Any measures above and be-

yond these, particularly open-

ing the equipment, are to be

carried out by an electrician. In

the case of repairs, always con-

tact our service centre.

• The washer was designed for

operation with a neutral deter-

gent based on a biologically

decomposable anionic tenside.

Other detergents or chemical

substances could impair the

safety of the washer and dam-

age it.

• If you come into contact with

cleaning agents, rinse with

plenty of clean water.

• Water that has passed through

a backow preventer is classi-

ed as undrinkable.

• High-pressure hoses, ttings

and couplings are important

for machine safety. Use only

high-pressure hoses, ttings and

couplings recommended by the

manufacturer.

• To ensure machine safety, use

only original replacement parts

from the manufacturer or re-

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 275082 PHD 100 E2 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 2,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 275082 PHD 100 E2 Manual

Product: