745531
11
Zoom out
Zoom in
Previous page
1/76
Next page
11
IEGB
7. Depress the start lever on the spray
gun (10) until the pressure is released.
8. Please repeat steps 5. to 7. several
times until there is no further air in the
equipment.
Interrupting operation
Release the lever of the gun (
A
10).
During prolonged work intervals turn
off the washer by its ON / OFF switch
(
A
5).
Ending operation
After working with cleaning agents,
run the equipment with clean water to
completely rinse the cleaning agent
from the pipes.
Release the lever of the gun (
A
10).
Turn off the pressure by its ON / OFF
switch (
A
5).
Turn off the water tap.
Pull the lever of the gun (
A
10) to vent
the pressure existing within the system.
Pull the mains plug and wind up the
mains cable.
Disconnect the pressure washer from
the water mains.
Using detergents
The washer was designed for operation
with a neutral detergent based on a bio-
logically decomposable anionic tenside.
Other detergents or chemical substances
could impair the safety of the washer and
damage it.
F
Fixing the Wheels
Both of the front wheels can be fastened
in order to prevent the unintentional rolling
away of the pressure washer.
To do so, press both bolts (16) down-
wards. The wheels are now no longer
able to turn.
To cancel the wheel xing, push the
two bolts (16) upwards.
Cleaning and
Maintenance
Pull out the power plug before
every maintenance operation. There
is a risk of electrocution or of injury
from moving parts.
Cleaning
Never direct the water jet
against the washer, nor clean
the washer under owing
water. This could give rise to
the danger of electric shock
and damage the washer! .
Always keep the washer clean. Do
not use any detergents or solvents.
Always keep the ventilation slots clean
and free.
Only clean the pressure washer with a
soft brush or a slightly moist cloth.
In case a nozzle of the jet tube (
A
12/13) is clogged up, use the nozzle
cleaning pin (
A
7) to remove the ob-
ject from the nozzle.
E
If necessary, take off the water con-
nection with the lter insert (9) and
clean the lter insert.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 275082 PHD 100 E2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 275082 PHD 100 E2 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 2,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info