745341
14
Zoom out
Zoom in
Previous page
1/74
Next page
11
PTS 500 A1
GB
IE
HW circular saw blade Z85 / 30:
Description: ø 85 mm, 30 HW teeth Suitability:
soft wood, hard wood, any kind of panel, plastics
Diamond-coated cutting saw blade
Z85VR:
Description: ø 85 mm, full edge disc Suitability:
ceramics, plastics
HS circular saw blade
Z85 / 36:
Description: ø 85 mm, 36 teeth – cross-cut left
/ right Suitability: soft wood, soft metal such as
aluminium, copper, plastics
Markings for cut length
Use the markings for the max. cut length , to
check where your cut starts and ends.
Markings for cutting line
The viewing window for the cutting line helps you
accurately guide machine along the cutting line on
the workpiece.
For a true to size cut, place the machine onto
the workpiece so that the cut marking appears
in the viewing window for the cutting line
.
Connecting the sawdust extraction
device
Push the suction hose onto the dust extractor
connector .
Attach an approved dust and sawdust extractor
to the suction hose
.
Changing the saw blade
1. Actuate the spindle lock and use the Allen
key to loosen the clamping screw (turn
clockwise to open). Now remove the clamping
screw and washer and the clamping flange
(see also Fig. B).
2. Set the cutting depth to the maximum position.
3. Swivel the base plate
up.
4. Remove the saw blade
.
5. Fit the saw blade in the reverse order as de-
scribed.
6. Actuate the spindle lock
(until it engages)
and use the Allen key to tighten the clamping
screw
.
The arrow on the saw blade must correspond to
the arrow showing the direction of rotation
(running direction shown on the device).
Cleaning and maintenance
WARNING! RISK OF INJURY! Always
remove the power plug from the
mains power socket before carrying
out any work on the appliance.
Always clean the appliance after finishing work.
For cleaning the housing use a cloth, under no
circumstances should you use petrol, solvents or
cleaning agents.
Disposal
The packaging is made from environment-
ally friendly material and can be disposed
off at your local recycling plant.
Do not dispose of power tools in
your normal household waste!
European Directive 2012/19/EU requires that
used power tools be collected separately and
recycled in an environmentally compatible manner.
Your local community or municipal authorities can
provide information on how to dispose of the worn-
out appliance.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 273278 PTS 500 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 273278 PTS 500 A1 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info