Manual Parkside IAN 270414 PTBM 500 B2 (page 10 of 76) (English, German, Dutch, French)

745345

Zoom out

Zoom in

1/76

GB IE

only by an authorised customer

service centre. Replace damaged

extension cables. This will ensure that

the power tool remains safe.

• Store unused power tools in a

safe place. The storage place

should be dry and lockable. This

prevents the power tool from being dama-

ged as a result of being stored or opera-

ted by inexperienced people.

• Never leave the tool before it has

come to a complete standstill. After-

running bits can cause injury.

• Do not use the power tool with

a damaged cable. Do not touch

the damaged cable and pull the

mains plug if the cable is dama-

ged while working. Damaged cables

increase the risk of electric shock.

• The device is unsuitable for processing of

foods.

• Edit not work pieces that you can not sure

retain. Especially round or uneven

workpieces.

Assembly

The bench drill is supplied disassembled.

Clean the column tube (15), baseplate

(17), drilling bench (20), vice (21) and

the drill chuck (4) beforehand, with a dry

cloth.

1. Place the column tube (15) on the ba-

seplate (17). Bolt the column tube (15)

to the baseplate (17) with the three as-

sembly srews (16) supplied. Tighten the

assembly srews (16) moderately tight

so that the threads in the baseplate (17)

do not strip.

2. Place the drilling bench (20) on the co-

lumn tube (15). Push the drilling bench

(20) into a lower position. Screw the

clamping bolt (24) into the clamp of the

drilling bench and x the drilling bench

(20) in a lower position.

3. Place the vice (21) on the drilling bench

(20) and screw it with the enclosed

mounting bolts (23) tightly to the drilling

bench (20).

4. Place the motor unit (14) on the column

tube (15) and secure the motor unit

(14) with the two clamping screws (12)

to the side with the allen key supplied

(30).

5. Bolt the three drill lifting arms into the

spindle guide (9). Tighten the three hole

lifting arms with a spanner (SW 6).

6. Release the small nut from the depth

stop (3).

I. Insert this nut into the protective device

(7).

II. Put the safety device (7) on the upper

part of the drill spindle.

III. secure the safety device with the clam-

ping bolt supplied.

IV. Insert the depth stop (3) through the

hole in the fence.

V. Screw the depth stop (3) with the safety

device (7).

Centrally align the depth stop (3) into

the bore of the fence.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 270414 PTBM 500 B2 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,21 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 270414 PTBM 500 B2 Manual

Product: