745345

Parkside IAN 270414 PTBM 500 B2 Manual

8
Zoom out
Zoom in
Previous page
1/76
Next page
8
GB IE
that might become caught in moving
parts.
- When working outdoors, non-slip foot-
wear is recommended.
- Wear a hair net to contain long hair.
Use protective equipment
- Wear safety goggles.
- Use a dust mask for work which genera-
tes dust.
Connect a dust extraction device
- If connections are available for dust ext-
raction and collection devices, make sure
that these are connected and properly
used.
Do not use the cable for purposes for which it
is not intended
- Do not use the cable to pull the plug from
the socket. Protect the cable from heat, oil
and sharp edges.
Secure the workpiece
- Use jigs or a vice to hold the workpiece
securely. This is safer than using your
hand.
Avoid abnormal body postures.
- Ensure secure footing and keep your ba-
lance at all times.
Maintain tools with care
- Keep cutting tools sharp and clean for
better and safer working.
- Follow the instructions for lubrication and
changing tools.
- Regularly check the connection cable
of the power tool and, if it is damaged,
have it replaced by a qualied specialist.
- Check extension cords periodically and
replace them if they are damaged.
- Keep handles dry, clean and free from oil
and grease.
Remove the plug from the mains socket
- when the power tool is not in use, before
maintenance and when changing tools
such as saw blades, drill bits, cutters.
Do not allow any tool keys to remain inser-
ted.
- check, before switching on, that keys and
adjusting tools have been removed.
Avoid unintentional starting
- Make sure that the switch is off when in-
serting the plug into the socket.
Use extension cables outdoors
- Only use approved and appropriately
marked extension cables outdoors.
Pay attention at all times
- Pay attention to what you are doing.
Work using common sense. Do not use
the power tool if you cannot concentrate.
Check the power tool for possible damage
- Before further use of the power tool, safe-
ty devices or slightly damaged parts must
be carefully examined in respect of their
proper and intended function.
- Check that the moving parts are working
properly and are not jammed or whether
parts are damaged. All parts must be
correctly tted and satisfy all conditions to
ensure the proper operation of the power
tool.
- Damaged safety equipment and parts
must be repaired properly or replaced by
an authorised specialist workshop unless
otherwise indicated in the instructions.
- Damaged switches must be replaced at a
customer service workshop.
- Do not use power tools if the switch can-
not be turned on and off.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 270414 PTBM 500 B2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 270414 PTBM 500 B2 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info