Manual Parkside IAN 115727 PNTS 250 A1 (page 14 of 60) (English, German, Dutch)

745222

Zoom out

Zoom in

1/60

GB IE

Grinding with the wet

grinding disc

• Stand in front of the wet grinding disc

(

1).

• Hold the workpiece with both hands

and lower it slowly onto the wet grind-

ing disc.

• The workpiece can also be supported

on the teeth of the water tank (

13).

Change grinding disc

Information on replace-

ment:

• Never operate the device without

protective equipment.

• Ensure that the rotation speed

stated on the grinding disc is the

same or higher than the nominal

rotation speed of the device.

• Ensure that the grinding disc

dimensions match those of the

device.

• Only use awless grinding discs

(sound test: an undamaged grind-

ing disc hanging freely on a

string will result in a clear sound

if it is tapped with a plastic ham-

mer).

• Never re-drill a locating hole

which is too small to make it

larger.

• Never use separate bushings or

adapters in order to make grind-

ing discs whose hole is too large

t the device.

• Do not use any saw blades.

• To clamp the grinding tools only

use the clamping ange provid-

ed. The pads between the clamp-

ing ange and the grinding tools

must be made of elastic materials

e.g., rubber, soft cardboard etc.

• Always reassemble the device

completely after replacing the

grinding disc.

Switch the device off and remove

the mains plug.

Allow the device to cool down.

Wear protective gloves when

changing the grinding discs in or-

der to avoid cutting damages.

Change dry grinding disc

1. Loosen the xing screws and re-

move the grinding disc cover (25).

2. Unscrew the grinding disc nut (22)

with a screw wrench (SW19) and

hold against the grinding disc

with one hand wearing a glove.

Unscrew the nut (right-hand th-

read): turn counter-clockwise.

3. Remove the clamping ange (23)

and the grinding disc (5).

4. Fit on the new grinding disc

(5) with the intermediate card-

board layers (24) and the clam-

ping ange (23), and screw the

grinding disc nut (22) manually

onto the nut (right-hand thread):

turn clockwise.

5. Tighten the grinding disc nut with

a screw wrench (SW19) applying

modest manual force.

6. Screw the grinding disc cover

(25).

7. Adjust the spark protection holder

(

18) and the workpiece sup-

port (

6) - the distance to the

grinding disc

(5) is max. 2 mm (see „Assem-

bly“)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 115727 PNTS 250 A1 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 4,13 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside IAN 115727 PNTS 250 A1

Parkside IAN 115727 PNTS 250 A1 User Manual - French - 56 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 115727 PNTS 250 A1 Manual

Product: