Manual Parkside IAN 115727 PNTS 250 A1 (page 13 of 60) (English, German, Dutch)

745222

Zoom out

Zoom in

1/60

GB IE

- Only use grinding tools which

bear information about the manu-

facturer, type of binding, dimen-

sion and permitted number of

revolutions.

- Only use grinding discs where

the printed rotational speed is at

least as high as what has been

specied on the name plate of

the device.

- Do not use broken, cracked or oth-

erwise damaged grinding discs.

- Never operate the device without

the visual protection disc.

- Always inspect the grinding disc

before starting the device:

Check the distance between

the spark protection holder and

grinding disc as well as work-

piece support and grinding disc

(distance maximum 2 mm).

- The grinding disc must be re-

placed once the spark protection

holder and workpiece support

on the grinding disc do not have

distance of max. 2 mm.

- Switch on the equipment only

when it is safely installed on the

work surface.

Keep your hands away from

the grinding disc when the

device is in operation. Injury

hazard!

Switching on and off

Ensure that the mains voltage

matches the specications on the

rating plate.

Connect the equipment to the mains.

1. To switch on, press the “I” On switch

and the device starts up (

8).

2. To switch off, press the “0” off switch

and the device switches off (

8).

After switching on the device, wait until the

device has reached its max. speed. Only

then must you start with the grinding.

The disc will continue to

run after the equipment is

switched off. There is a risk of

injury.

Test run:

Before starting work and after each change

of grinding disc, carry out a test run of at

least 60 seconds with no load. Switch off

the equipment immediately if the disc runs

lumpy, substantial vibrations occur, or ab-

normal noises are generated.

Grinding with the dry

grinding disc

• Place the workpiece on the workpiece

support (

6) and slowly bring it to its

desired angle on the grinding disc

(

5).

• Move the workpiece slightly from side

to side in order to achieve an optimal

grinding result. This way, the grinding

disc is worn uniformly. Occasionally,

allow the workpiece to cool down.

• The magnifying glass set into the spark

protection window (

2) helps you to

work accurately.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 115727 PNTS 250 A1 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 4,13 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside IAN 115727 PNTS 250 A1

Parkside IAN 115727 PNTS 250 A1 User Manual - French - 56 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 115727 PNTS 250 A1 Manual

Product: