745224

Parkside IAN 113362 PMGS 12 C3 Manual

15
Zoom out
Zoom in
Previous page
1/91
Next page
15 GB/IE
Operation / Maintenance and cleaning
Examples of appropriate tool selection Function:
Function Accessory Application Projection
(min–max) mm
Drilling
HSS drill
12
Drilling wood 18–25 when us-
ing the smallest
drill the projection
is 10 mm
Milling
Milling bits
20
Various tasks, e.g. hollowing out, goug-
ing, shaping, grooving or slotting
18–25
Engraving Engraving
bits
21
Making marks, craft projects
(see Fig. D)
18–25
Polishing, derusting
CAUTION!
Use only the lightest
contact pressure of
the tool on the
workpiece.
Metal brush
16
Derusting
9–15
Polishing wheel
14
Working on various metals and plastics,
in particular noble metals like gold or
silver (see Fig. E)
12–18
Cleaning
Plastic brush
19
E.g. cleaning complex plastic housings
or the area around a door lock
9–15
Grinding Grinding
wheels
15
Grinding work on stone, wood; fine
work on hard materials such as ceramic
or alloyed steel (see Figs. F, G)
12–18
Grinding bits
22
10
Cutting and sawing
Cutting discs
17
Cutting metal,
plastic or wood
12–18
Be sure not to exceed the maximum diameter of
composite abrasive wheels and grinding cones
and cylinders with 55 mm thread insert, and
the 80 mm maximum diameter of sandpaper
grinding accessories.
Note: The max. permissible mandrel length is
33 mm.
Store accessories inside the original box or oth-
erwise protect the accessories from damage.
Store accessories dry and away from aggres-
sive media.
Tips and tricks
Applying excessive pressure can cause the in-
stalled tool to break and / or damage the work
piece. Optimal results can be achieved by ap-
plying the tool to the work piece at a steady
speed range and little pressure.
Hold the device with both hands whilst cutting.
Please note the data and information in the
chart to prevent the spindle end touching the
perforated plate of the grinding tool.
Q
Maintenance and cleaning
The device is maintenance-free.
Clean all the dirt off the drill / grinder. Use a
dry cloth for cleaning.
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 113362 PMGS 12 C3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 113362 PMGS 12 C3 in the language / languages: English, German, Dutch, French, Swedish as an attachment in your email.

The manual is 1,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info