458602
69
Zoom out
Zoom in
Previous page
1/175
Next page
5 Diagnostics
5-2 NetPath 110 Users Manual - Installation Guide 980-001-0240B
November
2000
Table 5-1 FrameSaver NP 110 Front Panel Indicators
Nomenclature Description Function
UNIT POWER Green LED ON indicates unit is receiving proper operating voltages.
UNIT READY Green LED Steady ON, indicates base unit has successfully passed its
internal self-test.
FLASHING, indicates the unit is performing the self-test.
OFF after self-test (test time approx. 60 sec.), indicates a
hardware failure was detected during the self-test.
UNIT TEST Red LED ON, indicates the data path is disrupted by a currently
active test (user or telco initiated).
UNIT FRM MGMT. Green LED ON momentarily whenever a message is received on the
Management Channel PVC.
FLASHING simultaneously with NETW ALARM LED,
indicates software download* in process.
UNIT MODEM IN
USE
Green LED Steady ON, indicates the modem is connected to a port.
FLASHING, indicates ringing is incoming on the Dial
Line, or the modem is dialing out.
OFF, indicates on-hook
NETW ALARM Red LED Steady ON, indicates WAN facility (T1 loop) is not
receiving properly framed T1 data or is detecting red,
blue, or yellow alarm conditions.
Flashing indicates errors are being detected at the
Network Port (ES, SES, BES, UAS, LOFC, or CSS.)
FLASHING simultaneously with FR MGMT. LED,
indicates software download* in process.
NETW LMI Green LED ON, indicates LMI packets are being exchanged correctly
with the network.
FLASHING indicates some, but not all LMI packets are
being exchanged correctly with the network.
OFF indicates no LMI packets are being exchanged.
USER LMI Green LED ON, indicates LMI packets are being exchanged correctly
with the DTE.
FLASHING indicates some, but not all LMI packets are
being exchanged correctly with the DTE.
OFF indicates no LMI packets are being exchanged.
USER PORT TxD Green LED ON, indicates High Speed data is being Sent to local DTE
(Router).
USER PORT RxD Green LED ON, indicates High Speed data is being Received from
local DTE (Router).
* See Software Download at the end of this section for description.
69


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Paradyne FrameSaver NP 110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Paradyne FrameSaver NP 110 in the language / languages: English as an attachment in your email.

The manual is 1,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info