458602
65
Zoom out
Zoom in
Previous page
1/175
Next page
4 Operation
4-24 FrameSaver NP 110 Users Manual - Installation Guide 980-001-0240B
November
2000
Management
Tunneling Hub
Configuration
The Management Tunneling Hub Configuration Screen allows you to view and alter
parameters for Management Tunneling Hub operations.
The Management Tunneling Hub Configuration Screen is shown in Figure 4-10.
Fi
g
ure 4-10 Mana
g
ement Tunnelin
g
Hub Confi
g
uration Screen
1. Hub DLCI - Sets or disables the private network PVC for WAN management of
multiple remote units via this unit as a central Hub (Management Tunneling Hub.)
2. IP Encap - Select the type of IP encapsulation to be used for management traffic
within the PVC between the Central Router and the Hub. Selections are:
Raw - No protocol specified. Data (users payload) is encapsulated only by the
frame of the Frame Relay packet.
IETF - Protocol will be specified by its own NLPID.
3. Management Tunnels - DLCI, IP ADD - Each 19-character entry specifies the
routing (mapping) of packets through the Management Tunneling Hub.
The first (left-most) decimal number indicates the DLCI identifying the PVC on
which the remote unit is located.
The remaining four decimal numbers indicate the management IP address of the
remote unit.
Commands:
Help [?] - Advances to Help for Management Tunneling Hub Configuration screen.
Save [SA] - Saves parameters and returns to System View screen.
Cancel [X] - Returns to System View screen without saving changes.
Save the Management Tunneling Hub Configuration changes when they are all set cor-
rectly by entering SA followed by ENTER. Also returns the user to the System View
screen.
******************** Management Tunneling Hub Configuration ********************
Name: F@43802 IP Encap [E=]
Hub DLCI [D=#]: Disabled >>1) Raw<<
Management Tunnels X to Disable or 16 thru 991 2) IETF
--- DLCI,IP ADD --- --- DLCI,IP ADD --- --- DLCI,IP ADD ---
[T1=]:0.0.0.0.0 [T17=]:0.0.0.0.0 [T33=]:0.0.0.0.0
[T2=]:0.0.0.0.0 [T18=]:0.0.0.0.0 [T34=]:0.0.0.0.0
[T3=]:0.0.0.0.0 [T19=]:0.0.0.0.0 [T35=]:0.0.0.0.0
[T4=]:0.0.0.0.0 [T20=]:0.0.0.0.0 [T36=]:0.0.0.0.0
[T5=]:0.0.0.0.0 [T21=]:0.0.0.0.0 [T37=]:0.0.0.0.0
[T6=]:0.0.0.0.0 [T22=]:0.0.0.0.0 [T38=]:0.0.0.0.0
[T7=]:0.0.0.0.0 [T23=]:0.0.0.0.0 [T39=]:0.0.0.0.0
[T8=]:0.0.0.0.0 [T24=]:0.0.0.0.0 [T40=]:0.0.0.0.0
[T9=]:0.0.0.0.0 [T25=]:0.0.0.0.0 [T41=]:0.0.0.0.0
[T10=]:0.0.0.0.0 [T26=]:0.0.0.0.0 [T42=]:0.0.0.0.0
[T11=]:0.0.0.0.0 [T27=]:0.0.0.0.0 [T43=]:0.0.0.0.0
[T12=]:0.0.0.0.0 [T28=]:0.0.0.0.0 [T44=]:0.0.0.0.0
[T13=]:0.0.0.0.0 [T29=]:0.0.0.0.0 [T45=]:0.0.0.0.0
[T14=]:0.0.0.0.0 [T30=]:0.0.0.0.0 [T46=]:0.0.0.0.0
[T15=]:0.0.0.0.0 [T31=]:0.0.0.0.0 [T47=]:0.0.0.0.0
[T16=]:0.0.0.0.0 [T32=]:0.0.0.0.0 [T48=]:0.0.0.0.0
Help?] Save[SA] Cancel[X]
>
65


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Paradyne FrameSaver NP 110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Paradyne FrameSaver NP 110 in the language / languages: English as an attachment in your email.

The manual is 1,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info