458602
63
Zoom out
Zoom in
Previous page
1/175
Next page
4 Operation
4-22 FrameSaver NP 110 Users Manual - Installation Guide 980-001-0240B
November
2000
Protocol Monitor
Configuration
The Protocol Monitor Configuration Screen allows you to view and alter parameters
for Protocol Monitor and Top IP Traffic collection operations.
The Protocol Monitor Configuration Screen is shown in Figure 4-9.
Fi
g
ure 4-9 Protocol Monitor Confi
g
uration Screen
1. Percentage of Protocol Monitoring Resources Required - Displays the
percentage of sorting logic needed to support the currently displayed Protocol
selections.
2. Protocols - Selects up to seven protocols to be monitored, from the protocol list
displayed. All protocols to be monitored must be entered with a single command.
Can be selected individually, in a range, or group. Selected items are bracketed by
>>.....<< characters as shown in item #1 on the example screen above. Enter
P= followed by nothing or a space to deselect all (factory default). Parenthesis
indicate the subset under which a protocol is grouped, such as SNAP (Refer to
Encapsulation on page 4-10 in this manual for details).
NOTE: Additional protocols will not be added if the current value for Percentage of
Sorting Resources Required exceeds 100%. The command will be rejected when the
Save command is issued, and an error message will be displayed on the screen.
************************ Protocol Monitor Configuration ************************
Name: F@43802
Percentage of Sorting Resources Required: 37.93 %
Protocols [P=] ([P=m,n,...r] and/or [P=m-n] for up to 7 selections)
>> 1) IP<< >>11) APPLETALK(SNAP)<< 21) DECNET(Raw)
2) IP/TCP >>12) DECNET(SNAP)<< 22) VINES(Raw)
3) IP/TCP/TELNET 13) VINES(SNAP) 23) XNS(Raw)
4) IP/TCP/FTP 14) XNS(SNAP) 24) IP/TCP/HTTP
5) IP/UDP 15) ISO CLNP(IETF) 25) IP/TCP/GOPHER
6) IP/UDP/SNMP 16) IP/ICMP
>> 7) IPX(SNAP)<< 17) IP/TCP/SMTP
8) IPX/SPX(SNAP) 18) IPX(Raw)
>> 9) NETBIOS(SNAP)<< 19) IPX/SPX/(Raw)
>>10) SNA(SNAP)<< 20) APPLETALK(Raw)
Top Statistics [T=] Rank Top Stats By [R=]
>>1) Conversation<< >>1) Octets<<
2) Talk/Listen 2) Packets
3) Disable
Help[?] Save[SA] Cancel[X]
>
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Paradyne FrameSaver NP 110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Paradyne FrameSaver NP 110 in the language / languages: English as an attachment in your email.

The manual is 1,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info