Manual Paradyne FrameSaver NP 110 (page 61 of 175) (English)

458602

Zoom out

Zoom in

1/175

4 Operation

4-20 FrameSaver NP 110 User’s Manual - Installation Guide 980-001-0240B

November

2000

4. Desired Loss Mon Rate - Setting for the rate at which a Loss measurement

packet (Packet-Counting packet) is injected on each PVC in the list specified at

the bottom of this screen. Default value (60) dictates that within each 60-second

period, every PVC in the list is measured once. A PVC’s packet is considered lost

if it does not return before a subsequent packet is injected on that PVC. On a per-

PVC basis, the originating unit delays 10 seconds if the previous response was

lost. The packet send rate cannot exceed 10 per second.

NOTE: FrameSaver NP 110 Loss packets are 42 bytes in length, when issued. A

FrameSaver NP looping (receiving and returning) a Loss packet will add two

additional bytes to the packet.

5. Drpd Mon Pkt Thres - FrameSaver NP 110 maintains a count of monitor

packets lost (both Delay and Loss packets) for the current interval for each PVC.

When either of the monitor packet counts on any PVC equals or exceeds this

threshold setting, a “PVC Drpd Mon Alarm” is declared. The alarm is cleared

when all PVCs in a subsequent interval fail to equal or exceed the threshold

value. Applies to auto and manually learned DLCIs.

6. PVC Delay Thres - FrameSaver NP 110 maintains an average delay

measurement for each PVC for the current interval. A “PVC Delay Alarm” is

declared when the average on any PVC equals or exceeds this setting. The alarm

is cleared when all PVCs in a subsequent interval fail to equal or exceed the

threshold value. Applies to auto and manually learned DLCIs.

7. PVC Dlvd Pkt Thres - A “PVC Dlvd Pkt Alarm” is declared when the

percentage of packets delivered on any monitored PVC falls below this threshold

setting. The alarm is cleared when all PVCs in a subsequent interval fail to fall

below the threshold value. Applies to auto and manually learned DLCIs.

8. Interval Period - Sets the time period for each interval of PVC statistics,

from one (1) to 15 minutes.

NOTE: Changing the interval period will cause all PVC and Protocol Monitoring

statistics to be cleared.

9. “LMI” CIR Values - Selecting “Use,” sets (automatically) the CIR value of each

PVC to the value reported by the Frame Switch LMI message.

NOTE: This feature operates only with “LMI” LMI Protocol selected.

10. CIR Bins - Sets the upper value (in %) for each of the six “bins” in which CIR

data will be collected. All six values must be entered with each setting.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Paradyne FrameSaver NP 110 in the language / languages: English as an attachment in your email.

The manual is 1,17 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Paradyne FrameSaver NP 110 Manual

Product: