458602

Paradyne FrameSaver NP 110 Manual

47
Zoom out
Zoom in
Previous page
1/175
Next page
4 Operation
4-6 FrameSaver NP 110 User’s Manual - Installation Guide 980-001-0240B
November
2000
Parameter
Setting
Upon successful login, the System View screen is displayed.
The System View screen presents an overview of the system and provides access to
configuration, test, and other status screens.
The System View screen is shown in Figure 4-2.
Fi
g
ure 4-2 S
y
stem View Screen
The System View screen fields are as follows:
Name: Device ID defined in the Unit Configuration.
Location: Physical location (city and state) of unit.
Contact: Contact person and phone number contained in the Unit Configuration.
Active S/W: Revision of the software currently operating the base unit (active flash
memory).
Idle S/W: Revision of the software currently in the offline flash memory. If the soft-
ware in the Idle Flash is not usable, the field indicates “FlashFail.”
NOTE: For both Active and Idle software, the first two-digit number indicates the
unit’s feature level, the second indicates the major software revision, and the last
indicates minor revision level. Alpha characters at the end of the field indicate the
option type installed, if any (i=ISDN, x=DSX/Drop, ix=both).
S/N: Indicates the hardware serial number of the base unit.
System Test/Fault, Netw Port Fault, Device Fault and Active Test
All Test and/or Fault fields display: Blank or the highest priority Test or Fault
causing a disruption of the data path or other operational disruption of the unit.
Refer to the Appendix of this manual for a list and description of tests and faults.
*********************** FrameSaver NP 110 - System View ************************
Name: F@43802 Active S/W:03.01.30
Location: Fair Lawn, N.J. Idle:A S/W:03.01.20
Contact: J. Jones S/N:002431
System Test/Fault: User Ckt Status
Netw Port Fault: RTS/DTR/LL/Pwr: On /On /Off/On
Device Fault: Frame Fault:
Active Test:
Modem Status
Fault:
Connection:
Aux Port Status
Aux1 DTR: On
Aux2 DTR: On
DevConfig[DC] CsuConfig[CC] FrameConfig[FC] PvcConfig[PC] MonConfig[MC]
DevTest[DT] CsuStats[CS] FrameStats[FS] PvcStats[PS] MonStats[MS]
SnmpConfig[SC] TrapConfig[TC]
Help[?] Logout[LO] AutoUpdate[AU] TopStats[TS] HubConfig[HC]
>
… 47 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Paradyne FrameSaver NP 110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Paradyne FrameSaver NP 110 in the language / languages: English as an attachment in your email.

The manual is 1,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info