458602

Paradyne FrameSaver NP 110 Manual

45
Zoom out
Zoom in
Previous page
1/175
Next page
4 Operation
4-4 FrameSaver NP 110 User’s Manual - Installation Guide 980-001-0240B
November
2000
Block Mode
FrameSaver NP 110 supports Block as well as Character mode management access.
To enable Block mode, set the VT-100 terminal (or emulator) to “LOCAL ECHO.”
When logging in, along with entering the password, type “ \VT100” (include a space
between the last character of the password and the “\” character) followed by ENTER.
In this mode, the VT-100 terminal will echo characters to the screen locally and store
them, sending the entire string to the FrameSaver NP 110 when ENTER is pressed.
The FrameSaver NP 110 will not echo received characters in this mode. It will process
all received characters at once.
Logout
Logout is automatic on disconnecting the local terminal, terminating a dial-in call, or
after a timeout period (approx. 10 mins.) if a Telnet session is broken.
Logout can be done manually by selecting Logout (LO) from the System View Screen.
Screen Format
The general format for FrameSaver NP 110 screen displays is as follows:
Title - A screen title is always shown at the top center of each screen.
Body - The central portion shows the specific screen details for that screen.
Command Line - User commands are always entered at the bottom of the screen
marked by the cursor character “>”.
Error or Warning Messages - Are always shown immediately below the Command
Line.
Examples of each of the screen displays are shown in the appropriate sections of this
manual.
Help Text
Help text is provided for each of the FrameSaver NP 110 screen displays to assist the
user. Help text for a screen is accessed from that screen by entering “?” followed by
ENTER. The HELP command is shown on the command line of each applicable
screen.
Edits - Selections
Edits to parameters fields, such as on the configuration screens, are made one field at
a time. Each field is edited by entering the character used to designate the field (shown
in brackets) on the screen, followed by the equal sign “=” and a selection from a pick-
list (a number, an ID, or a string of characters), all followed by ENTER.
Current selections are highlighted on the screens with brackets “>>” ..... “<<”.
NOTE: Multiple fields may be edited using a single command (except when indicated
otherwise) by separating the entries by commas, all followed by ENTER.
… 45 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Paradyne FrameSaver NP 110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Paradyne FrameSaver NP 110 in the language / languages: English as an attachment in your email.

The manual is 1,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info