458602

Paradyne FrameSaver NP 110 Manual

48
Zoom out
Zoom in
Previous page
1/175
Next page
4 Operation
980-001-0240B FrameSaver NP 110 User’s Manual - Installation Guide 4-7
November
2000
User Ckt Status -
RTS/DTR/LL: State of leads when Power is being detected from the DTE.
States are: ON or OFF.
Pwr: ON or OFF based on sensing voltage on Tx data lead(s) from the DTE.
Frame Fault: Blank or highest priority Frame Fault disrupting the data path.
Refer to the Appendix of this manual for a list and description of faults.
Modem Status -
Fault: Highest priority fault that disrupts modem operation.
Refer to the Appendix of this manual for a list and description of faults.
Connection: Currently active modem assignment.
Valid items are: Base module, AUX 1 Port, AUX 2 Port,
Option module or (blank) if none active.
Aux Port Status -
Aux1 DTR: State of DTR Lead for the interface, ON or OFF.
Aux2 DTR: State of DTR Lead for the interface, ON or OFF.
Commands:
DevConfig [DC] - Advances to Device Configuration Screen.
CsuConfig [CC] - Advances to CSU / Interface Configuration Screen.
FrameConfig [FC] - Advances to Frame Manager Configuration Screen.
PvcConfig [PC] - Advances to PVC Performance Configuration Screen.
MonConfig [MC] - Advances to Protocol Monitor Configuration Screen.
DevTest [DT] - Advances to Device Status / Test Screen.
CsuStats [CS] - Advances to CSU / DSX Statistics Summary Screen.
FrameStats [FS] - Advances to Frame Manager Statistics Summary Screen.
PvcStats [PS] - Advances to PVC Statistics Summary Screen.
MonStats [MS] - Advances to Protocol Monitor Statistics Summary Screen.
SnmpConfig [SC] - Advances to SNMP Community Access Configuration Screen.
TrapConfig [TC] - Advances to SNMP Trap Manager Configuration Screen.
TopStats [TS] - Advances to Top Talker/Conversation Statistics Summary Screen.
HubConfig [HC] - Advances to Management Tunneling Hub Configuration Screen.
Help [?] - Advances to “Help” for System View screen.
Logout [LO] - Logs out from system.
AutoUpdate [AU] - Causes the status fields on the current screen displayed to refresh
automatically (approximately every five seconds).
To proceed setting operating parameters, select Device Configuration screen [DC] by
typing “DC” followed by ENTER.
… 48 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Paradyne FrameSaver NP 110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Paradyne FrameSaver NP 110 in the language / languages: English as an attachment in your email.

The manual is 1,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info