502189
105
Zoom out
Zoom in
Previous page
1/112
Next page
On-screen messages
105
Message Meaning / Action
Invalid system time. Please
exit !
Cannot get the time information and cannot edit Timer Programming screen.
Check the connection of the RF cable.
Invalid system time, Timer
Programming will not work.
Please press TV button on
remote control and check time
display on Banner
Cannot get the time information. If there is no time displayed on the Information
banner, check the connection of the RF cable.
Max. number of timers already set !
The maximum number of timer programming events is 15.
New channels found!
Press OK to update channel
list.
Press EXIT to ignore.
There may be new channels available.
This message will appear each time a change is made by the broadcasters.
This message can be deactivated by setting [New Channel Message] to [Off] in
[DVB Tuning Menu].
Selecting OK will perform [Update Channel List].
No channel found.
Please check aerial or local
signal availability.
Press OK to start Auto Setup.
Follow the on-screen instructions.
Please also refer to p. 102.
If channels are still not found, consult your local Panasonic dealer.
No module inserted
Check the CI module is inserted completely (p. 59).
No recording - Already
recording
The equipment may already be recording.
No recording - Check media
The tape or disc may be “write protected”, full, missing or damaged.
No recording - Playing
The equipment may be playing the tape or disc.
No recording - Unknown
reason
The recording may not be performed. Check the equipment.
No service
The broadcaster has stopped the service. Check the channel in the TV Guide.
(p. 25)
No signal
The TV cannot detect the signal. Check the connection of the RF cable.
Overcurrent error on USB
device occurred.
Please remove the USB device,
and switch off the TV by mains
power switch.
The connected USB device might cause overcurrent error. Follow the on-
screen instructions.
Check if foreign objects are inside the USB port.
PIN incorrect!
The PIN number you entered is wrong.
Please check settings and
connections on HDMI devices.
Communication error in VIERA Link function (p. 87).
Please wait.
A function is in progress.
Recording this channel now
The recorder is recording the programme from its own tuner. You can turn the
TV off and leave the equipment recording in the normal way.
Reset to Factory Shipping
Condition Completed. TV will
automatically restart. Do not
turn off
[Auto Setup] will automatically start (p. 16).
Sending Preset Data
Q-Link or VIERA Link channel download is in progress.
Software successfully updated.
Press EXIT to continue.
The software updating is finished.
Software update failed. Please
try again later.
Press EXIT to continue.
Perform [System Update Search Now] in System Update (p. 60).
If this is still unsuccessful, there may not be any new software available.
The device is not directly
connected to the TV.
The device may not work
correctly.
Please do not connect the device via a USB HUB.
This device will be formatted
and all contents deleted. Are
you sure?
Once you format the USB HDD, all the recorded programme will be erased.
This timer will not follow the
TV Guide information.
Press OK to continue, RETURN
to restore original timer.
If you edit the start time or end time of Guide link programming by more than
10 minutes, it will no longer be performed as Guide link programming. The
programming will be performed according to the time setting.
105


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic TX-P42ST50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic TX-P42ST50 in the language / languages: English as an attachment in your email.

The manual is 4,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic TX-P42ST50

Panasonic TX-P42ST50 User Manual - English - 48 pages

Panasonic TX-P42ST50 User Manual - German - 112 pages

Panasonic TX-P42ST50 User Manual - Dutch - 48 pages

Panasonic TX-P42ST50 User Manual - Dutch - 112 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info