502189
102
Zoom out
Zoom in
Previous page
1/112
Next page
FAQs
102
FAQs
Before requesting service or assistance, please follow these simple guides to resolve the problem.
If the problem still persists, please contact your local Panasonic dealer for assistance.
Block noise, frozen or disappearing image occurs in DVB mode / White spots or shadow image (ghosting)
occurs in Analogue mode / Some channels cannot be tuned
Check the position, direction and connection of the aerial.
Check [Signal Condition] (p. 53). If [Signal Quality] is displayed in red, the DVB signal is weak.
Check your postcode area is able to receive the Freeview channels at www.freeview.co.uk
Digital signals may be relatively low to prevent interference with analogue signals for the period of Digital
Switchover. Check the schedule of Digital Switchover at www.digitaluk.co.uk
Weather conditions will affect signal reception (heavy rain, snow, etc.), in particular in poor reception areas. Even
during good weather, the high pressure can cause poor reception of some channels.
Due to the digital reception technologies involved, quality of the digital signals may be relatively low in some
cases, despite good reception of analogue channels.
Turn the TV off with the Mains power On / Off switch, and then on again.
If problem persists, consult your local dealer or service provider for the availability of services.
Neither image nor sound is produced
Check the TV is turned on.
Check the mains lead is plugged into the TV and the socket outlet.
Check the TV is in AV mode.
Check the correct input mode is selected.
Check the Picture Menu (p. 39, 40) and volume.
Check all required cables and connections are firmly in place.
Auto aspect
Auto aspect is designed to provide you with the best ratio to fill the screen. (p. 94)
Press the ASPECT button if you want to change the aspect ratio manually. (p. 24)
Black and white picture
Check that the output of the external equipment matches the input of the TV.
When connecting with SCART, ensure the output setting of the external equipment is not S-Video.
Q-Link function does not work
Confirm SCART cable and connection.
Also set [AV1 out] in the Setup Menu. (p. 43)
[VIERA Link] function does not work and an error message appears
Confirm the connection. (p. 84, 85)
Turn the connected equipment on and then switch the TV on. (p. 87)
Recording does not start immediately
Check the settings of the recorder. For details, read the manual of the recorder.
The screen becomes dim
This occurs when the contrast is lowered automatically to avoid image retention in the following conditions without
any user operation for a few minutes:
No signal in DVB or AV mode
Selected locked channel
Selected invalid channel
Selected radio channel
Displayed menu
Thumbnail or still picture
Problem Causes / Actions
Screen
Chaotic image, noisy
Set [P-NR] in the Picture Menu to remove noise. (p. 39)
Check nearby electrical products (car, motorcycle, fluorescent lamp).
No image can be
displayed
Is [Contrast], [Brightness] or [Colour] in the Picture Menu set to the minimum?
(p. 39)
Check the setting of [AV2] ([COMPONENT] / [VIDEO]) in [Input Selection] to
match the output of the external equipment. (p. 31)
Blurry or distorted image
(no sound or low volume)
Reset channels. (p. 50)
Unusual image is
displayed
Turn the TV off with Mains power On / Off switch, then turn it on again.
If the problem persists, initialise all settings. [Shipping Condition] (p. 57)
102


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic TX-P42ST50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic TX-P42ST50 in the language / languages: English as an attachment in your email.

The manual is 4,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic TX-P42ST50

Panasonic TX-P42ST50 User Manual - English - 48 pages

Panasonic TX-P42ST50 User Manual - German - 112 pages

Panasonic TX-P42ST50 User Manual - Dutch - 48 pages

Panasonic TX-P42ST50 User Manual - Dutch - 112 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info