613117
49
Zoom out
Zoom in
Previous page
1/56
Next page
49
RQT7061
INFO
Recording and timer recording Page
Play
Displays
Cannot record. You haven’t inserted a disc or the disc you inserted cannot be recorded on. Insert a disc the
unit can record onto.
The disc is unformatted. Format the disc so this unit can record on it. [RAM]
The write-protect tab on the cartridge is set to PROTECT.
Some programs have limitations on the number of times they can be recorded (CPRM).
The disc is protected with DISC SETTING.
The disc is full or nearly full. Erase unneeded programs or use another disc.
You cannot record on finalized DVD-R discs.
Audio from FM/AM broadcasts and the L1 OPTICAL IN terminal cannot be recorded.
8
33
8
51
32
30
VCR Plusr programming does
not work properly.
The guide channels are incorrect. Go to the Channel menu and correct them with “VCR Plusi
CH Setting”.
The clock is wrong. Go to the Set Up menu and correct it with Clock settings.
10
43
Timer recording does not work
properly.
The timer program is incorrect. Correct the program.
The unit is not on timer recording standby. (“F” on the unit’s display is not on.) Press [Í
POWER] to turn the unit off and make sure that “F” is on.
Different timer program times overlap.
The clock is wrong. Go to the Set Up menu and correct it with Clock settings.
16
43
The unit switches to standby
while making a timer recording.
The disc has run out of space. Use a disc that has enough space to record the program.
The timer program remains
even after recording finishes.
The timer program remains if set to daily or weekly. 15
Timer recording does not stop
even when [] is pressed.
Press [] and then [ENTER] within 5 seconds to turn “F” off. Recording stops.
The available recording time
doesn’t increase even after
erasing recordings on the disc.
As this unit is unable to erase data written to DVD-RAM with a computer, the available
recording time does not increase. The data will be erased if you reformat the disc.
If the disc is dirty, wipe with the DVD-RAM/PD disc cleaner (optional) before formatting.
Available recording space on the DVD-R does not increase even after erasing previously
recorded programming.
33
53
A part or whole of a recorded
program has been lost.
If there is a power failure or the plug is disconnected from the household AC outlet while
recording or editing, the program may be lost or the disc may become unusable.
We cannot offer any guarantee regarding lost programs or discs. You will have to format the
disc or use a new disc.
Play fails to start even when [1]
(PLAY) is pressed.
Play starts but then stops
immediately.
Insert the disc correctly with the label facing up.
This unit cannot play discs other than the ones listed in these operating instructions.
The disc is dirty. Clean it.
The disc may be badly scratched.
You inserted a blank DVD-RAM or DVD-R.
Condensation has formed: Wait 1 to 2 hours for it to evaporate.
12
8
53
A title or chapter doesn’t play
when it is selected.
Some titles and chapters on DVD-Video are not played when you have changed the ratings
level.
38
Picture distorted during search. Some distortion is normal.
Alternative soundtrack and
subtitles cannot be selected.
The languages are not recorded on the disc.
You may have to use the disc’s menus to select languages.
19
No subtitles. Subtitles are not recorded on the disc.
Turn the subtitles on.
Subtitles around markers may fail to appear.
22
Angle cannot be changed. This function depends on software availability. Angles can only be changed during scenes
where different angles are recorded.
You have forgotten your ratings
password.
Return the ratings setting to “8”.
While the disc tray is open, press and hold [4] and [5] on the main unit at the
same time for 5 or more seconds.
The display is dim. Go to the Display menu and change the display’s brightness with “FL Display”. 39
“12:00” is flashing on the unit’s
display.
The clock is not set. 43
The displayed recording time
and actual recording time differ.
Displayed recording time is based on the number of frames per second. This number is
subject to minute variations. When recording over long periods, these variations may result in
the difference between displayed recording time and actual recording time. This is normal.
The display doesn’t show the
correct time. [MP3]
Times may not appear correctly when searching through tracks recorded with a variable bit
rate.
7061en.book 49 ページ 2003年6月16日 月曜日 午前10時12分
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SCHT1000PP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SCHT1000PP in the language / languages: English as an attachment in your email.

The manual is 3,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info