613117
47
Zoom out
Zoom in
Previous page
1/56
Next page
47
RQT7061
INFO
Error messages
On the television Page
On the unit’s display
Cannot finish recording
completely.
The program was copy-guarded.
No space left on the disc.
Create space by erasing any unwanted programs. [RAM]
Use a new disc. [RAM] [DVD-R]
Recording was not completed for some other reason.
30
Cannot record on the disc. The disc is scratched. Use another disc.
The disc is dirty.
You inserted an incompatible disc.
53
8
Contents of this disc are
protected.
The program is write-protected. Cancel the protection.
The disc is write-protected. Cancel Disc Protection.
30
32
Disc is full. No space left on the disc.
Create space by erasing any unwanted programs. [RAM]
Use a new disc. [RAM] [DVD-R]
30
Error has occurred. Please
press ENTER.
A serious, but temporary error has occurred and one of the unit’s safety devices has
activated. Press [ENTER]. The unit switches to the standby mode. Press [Í POWER] to
turn the unit on again.
Finalizing is necessary for
compatible playback.
To enable playback of your DVD-R on compatible equipment, it is necessary to finalize it. 33
No disc. You haven’t inserted a disc. Correctly insert a disc that this unit can use.
The disc is upside down. If it is a single-sided disc, insert it so the label is facing up.
8
12
Please check write protect tab
on the disc.
The write-protect tab on the cartridge is set to PROTECT.
Use a ballpoint pen or similar to release the write protection.
Please set clock. The clock is not set. 43
This disc cannot be read. You inserted an incompatible disc. 8
This disc may not be played in
your region.
You tried to play a disc with a region number different from this unit’s region number. This
unit can only play discs with the region numbers compatible with this unit (1, All, or
including the number 1).
Cover
page
This is non-recordable disc. The unit cannot record on the disc you inserted. Insert a DVD-RAM or unfinalized DVD-R.
You inserted an unformatted DVD-RAM. Format the disc with this unit.
8
33
This disc is not formatted
properly.
Please format the disc in ‘DISC
SETTING’ to record.
Your selection exceeds the
recorder’s rating limit.
A ratings level has been set for DVD-Video with this unit. Unlock the unit with “Ratings” in
“Disc”.
38
PROTECT
CHK REMOTE
(“” stands for a number.)
The remote control and main unit are using different codes. Change the code on the
remote control or main unit.
42
AF F61 Check and correct the speaker cord connections.
If this does not fix the problem, there is a power supply problem. Consult the dealer.
Setup
Guide
DIGITAL UNLOCK There is no signal input to the L1 OPTICAL IN terminal.
Make sure to check the connections and if the power of the connected equipment is
turned on.
NO READ The disc is dirty or badly scratched.
Clean the disc if it is dirty.
The disc cannot be played if it is scratched and this display doesn’t disappear.
The unit cannot read the disc.
You have used a DVD-RAM/PD lens cleaner and it has finished.
53
53
SELF CHECK There was a power failure or the AC plug was disconnected while the power was on. The
unit is carrying out its recovery process. Wait until the message disappears.
U14 The unit is hot.
The unit switches to standby automatically for safety reasons and you cannot operate it.
Wait for about 30 minutes for the service number to disappear.
Select a position with good ventilation when installing the unit.
Do not block the cooling fan on the rear of the unit.
U99 The unit fails to operate properly. Press [Í POWER] to switch the unit to standby. Now
press [Í POWER] again to turn the unit on.
UNSUPPORT You have inserted a disc the unit cannot play or record on.
The signal input into the L1 OPTICAL IN terminal is not Dolby Digital or Linear PCM.
8
7061en.book 47 ページ 2003年6月16日 月曜日 午前10時12分
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SCHT1000PP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SCHT1000PP in the language / languages: English as an attachment in your email.

The manual is 3,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info