613117
48
Zoom out
Zoom in
Previous page
1/56
Next page
48
RQT7061
INFO
Troubleshooting guide
Before requesting service, make the below checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do
not solve the problem:
In the U.S.A., contact the Panasonic Customer Call Center at 1-800-211-7262, or e-mail consumerproducts@panasonic.com,
or the website (http://www.panasonic.com).
In Canada, contact the Panasonic Canada Inc. Customer Care Centre at 1-800-561-5505, or visit the website (www.panasonic.ca),
or an authorized Servicentre closest to you.
Power Page
Operation
Remote control
Picture
When progressive output is on, refer also to “Progressive video” below.
Progressive video
No power. Insert the AC power supply cord and system cable securely. Setup
Guide
The unit switches to the standby
mode.
This is a power saving feature. You can turn it off if you would prefer (Set Up—Off Timer—Off).
Press [Í POWER] to turn the unit on.
One of the unit’s safety devices may have activated. Press [Í POWER] to turn the unit on.
38
The unit is on but cannot be
operated.
Some operations may be prohibited by the disc.
The unit is hot (“U14” appears on the display). Wait for “U14” to disappear.
One of the unit’s safety devices may have activated.
Reset the unit as follows:
1Press [Í POWER] to switch the unit to standby.
If the unit doesn’t switch to standby, press and hold [Í POWER] for about 10 seconds.
The unit is forcibly switched to standby.
Alternatively, disconnect the AC power supply cord, wait one minute, then reconnect it.
2Press [Í POWER] to turn the unit on.
47
During disc operation the unit
does not respond.
The selector has been set to “FM” or “AM”. Press [DVD] to select “DVD/CD” as the source.
The remote control doesn’t
work.
[HOME THEATER, TV] is not switched to “HOME THEATER”. Switch to “HOME THEATER”
when operating this unit.
The remote control and main unit are using different codes. Change the code on the remote
control or main unit.
The batteries are depleted. Replace them with new ones.
Point the remote control at the remote control sensor on the main unit.
Remove obstacles from between the remote control and main unit.
42
2
Cannot operate the television. Change manufacturer code. Some televisions cannot be operated even if you change the
code.
[HOME THEATER, TV] is not switched to “TV”. Switch to “TV” when selecting the receiving
channel for the television.
11
11
The images from this unit do not
appear on the television.
Make sure that the television is connected to the VIDEO OUT terminal, S-VIDEO OUT
terminal or COMPONENT VIDEO OUT terminals on this unit.
Make sure that the television’s input setting (e.g., VIDEO 1) is correct.
You have set “TV Type” to “Aspect 4:3 & 480P” or “Aspect 16:9 & 480P” in the TV Screen
menus, but the television isn’t compatible with progressive signals. Press and hold [] and
[TIME SLIP] on the unit at the same time for about 5 seconds. The setting will change to
interlace.
Setup
Guide
Television reception worsens
after connecting the unit.
This can occur because the signals are being divided between the unit and the television.
It can be solved by using a signal booster, available from audio-visual suppliers. Consult your
dealer if reception does not improve.
Screen size is wrong. Check the settings on your television.
Check the settings for “TV Type”, “4:3 TV Settings for DVD-Video” or “4:3 TV Settings for
DVD-RAM” in the TV Screen menu.
11, 39
On-screen messages do not
appear.
Go to the Display menu and select “Automatic” for “Status Messages”.
Press [STATUS] to show the on-screen messages constantly.
39
24
The blue background does not
appear.
Go to the Display menu and select “On” for “Blue Background”. 39
There is ghosting. Change the settings for “3D NR”, “Block NR”, and “Mosquito NR” to “0” or turn “MPEG-DNR”
off if it is on.
23
Play stops for a moment during
Quick View.
Play may stop where two play lists join, but this is not a malfunction.
There is ghosting when
progressive output is on.
Set “Progressive” to “OFF”. This problem is caused by the editing method or material used on
DVD-Video, but should be corrected if you use interlace output.
23
There is no apparent change in
picture quality when adjusted
with the Video menu in the on-
screen menus.
The effect is less perceivable with some types of video.
7061en.book 48 ページ 2003年6月16日 月曜日 午前10時12分
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SCHT1000PP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SCHT1000PP in the language / languages: English as an attachment in your email.

The manual is 3,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info