628266
156
Zoom out
Zoom in
Previous page
1/172
Next page
Problem Cause and Solution
When
making a video conference call by entering an MCU’s conference
room number@IP address, "SIP Server" or "Gatekeeper" is set to
"ON".
Change the "SIP Server" and "Gatekeeper" settings to "OFF"
(Page 116, Page 118).
The Internet connection is not established.
Some hubs, routers, etc. can take 10 seconds or more to establish an
Internet connection.
A video conference call to a unit with an incompatible software version
was attempted.
Check the software version of all parties. Update the unit so that the
versions match.
There may be a problem with your communication lines.
Contact your dealer.
You are trying to make a video conference call by connecting to an MCU
or non-Panasonic video conference system.
When connecting to an MCU or non-Panasonic video conference
system, encryption may not be available or some operations may not
function as expected, depending on the device used by the other party.
In this case, contact your dealer.
You are trying to connect to an MCU or non-Panasonic video
conference system that is not compatible.
Use the outgoing call history to confirm the name of the device, and
then contact your dealer.
The host name is not being resolved to the correct IP address.
Check the settings for "DNS Server" or "Primary DNS Server" in
network settings (Page 97) (or local site settings when a local site is
selected [Page 131]).
The image is distorted.
The settings of the hub or router are different to those of the unit.
Contact your dealer.
Packet loss is occurring. (The network is congested.)
Check
the display of the network status indication (Page 39). If the icon
shows only 0–1 bars continuously, press [Status] twice and check the
fields "Loss" and "Bandwidth", then contact your network
administrator or dealer (Page 89).
The maximum bandwidth setting is incorrect.
During a 3-party video conference call, at least 1 Mbps of bandwidth is
required. Change the "Max. Bandwidth" setting to a value of
"1.0 Mbps" or higher (Page 99, Page 132).
During a 4-party video conference call, at least 1.5 Mbps of bandwidth
is required. Change the "Max. Bandwidth" setting to a value of
"1.5 Mbps" or higher (Page 99, Page 132).
If you are trying to connect to an MCU or non-Panasonic video
conference system, depending on the other party’s device, the image
may be distorted due to lack of bandwidth. In this case, contact your
dealer.
There may be a problem with your communication lines.
Contact your dealer.
156 User Manual Document Version 2013-09
Additional Information
156


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic KX-VC300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic KX-VC300 in the language / languages: English as an attachment in your email.

The manual is 3,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info