628266
155
Zoom out
Zoom in
Previous page
1/172
Next page
Problem Cause and Solution
Cannot connect with another
party.
The LAN cable is not connected properly.
Check that it is connected to the unit properly
(Page 22). Perform a
network test by entering the IP address of the other party, and then
confirm the connection to the other party (Page 109).
The maximum bandwidth setting is incorrect.
3-party video conference calls are not possible if 512 kbps is selected.
4-party video conference calls are not possible if 512 kbps or 768 kbps
is selected. Check your maximum bandwidth setting, and select a value
that is appropriate for your network environment.
If you are trying to connect to a non-Panasonic video conference
system, a connection might not be possible depending on either your
or the other party’s bandwidth settings. Either check your settings and
change them, or have the other party do the same (Page 99,
Page 132). If you change your own settings, you should register the
new information as a local site (Page 131).
The call type setting is incorrect.
Set the call type setting so that it is the same as the other party’s
(Page 115).
The SIP settings are incorrect.
Check the SIP settings (Page 116). After you check the SIP settings, if
you still cannot connect to the other party, contact your network
administrator.
The ID and password for digest authentication are incorrect.
Check that the values specified for "Authentication ID" and
"Authentication Password" are correct (Page 117).
The "SIP Transport Protocol" setting is different from the other
party’s.
Set the "SIP Transport Protocol
" setting so that it is the same as the
other party’s (Page 117, Page 134).
The local site settings are incorrect.
Confirm the local site settings. Specify the settings that are appropriate
for your usage environment (Page 131).
The IP address is not entered correctly.
Confirm that the other party’s IP address is correctly entered.
The SIP URI (or SIP user name), H.323 extension, or H.323 name is
not entered correctly.
Check whether the SIP URI (or SIP user name), H.323 extension, or H.
323 name of the other party is entered correctly or whether it conforms
to the relevant standard.
The MCU’s conference room number@IP address is not entered
correctly.
Check whether the conference room number and IP address of the
MCU is entered correctly.
Document Version 2013-09 User Manual 155
Additional Information
155


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic KX-VC300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic KX-VC300 in the language / languages: English as an attachment in your email.

The manual is 3,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info