628266
118
Zoom out
Zoom in
Previous page
1/172
Next page
Making H.323 Settings
Note
These settings can only be made in IP mode
(Page 115)
and when "H.323" is set to "ON" on
the call type settings screen.
When connecting to an MCU by entering the
MCU’s conference room number@IP address,
"SIP Server" (Page 116) and "Gatekeeper"
must be set to "OFF".
If video conference calls cannot be made
because there is a problem with the gatekeeper
and H.460 server, the H.323 settings are
incorrect (on the gatekeeper and the H.460
server, or on the unit), etc., "Not registered"
will be displayed on the Home screen instead of
the H.323 extension/H.323 name. In this case,
you cannot make calls using either IP
addresses or the gatekeeper and H.460 server.
Contact your network administrator.
1. Log in to the administrator menu (Page 112).
The administrator menu screen is displayed.
2. Press [
].
The second page is displayed.
3. Use [
][ ]
to select "H.323 Settings" and press
[Enter].
The H.323 settings screen is displayed.
4. Use [ ][ ]
to select the following items for input:
"Gatekeeper": Use [
][ ] to select "ON" or
"OFF" (default).
Note
This setting is available only when "ON" is
selected for "H.323" (Page 116) and
"OFF" is selected for "SIP Server" (Page
116).
"Gatekeeper Address
": Enter the gatekeeper’s IP
address (or host name).
Note
If the IP address contains 1 or 2 digit
numbers,
enter these numbers as they are.
Do not enter like [.001].
Example: The IP address is [192.168.0.1].
Correct entry: [192.168.0.1]
Wrong entry: [192.168.000.001]
The DNS server setting is necessary to
enter host names (Page 97).
See Page 40 for details about the
characters that can be input for host names.
"H.323 Name": Enter the H.323 name.
Alphanumeric characters and the symbols . = * + _
- $
! ? / ' ( ) can be entered (up to 60 characters).
"H.323 Extension": Enter the H.323 extension.
Numeric characters and the symbols # and * can be
entered (up to 20 characters).
Note
Enter a standards-compliant value. For
details,
contact your network administrator.
"Authentication": Use [
][ ] to select whether
to enable authentication.
"ON": Enables authentication.
"OFF" (default): Disables authentication.
"Authentication ID": Enter an authentication ID
(1–60 characters [alphanumeric, space, symbols])
(Page 137). &, <, >, comma (,), double quotation
mark (") cannot be entered.
"Authentication Password": Enter an
authentication password
(0–60 characters
[alphanumeric, space, symbols]) (Page 137). &, <,
>, comma (,), double quotation mark (") cannot be
entered.
Note
"Authentication ID" and "Authentication
Password" can only be set when
"Authentication" is set to "ON".
While being entered, the characters of the
authentication password are displayed, but
once the settings are saved, all the
characters
will be displayed as asterisks (*),
and you will no longer be able to check the
authentication password on the screen.
Record the authentication password
beforehand, and store it in a safe location.
118 User Manual Document Version 2013-09
Contacts and Settings
118


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic KX-VC300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic KX-VC300 in the language / languages: English as an attachment in your email.

The manual is 3,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info