628266
117
Zoom out
Zoom in
Previous page
1/172
Next page
"SIP Username": Enter the SIP user name.
Alphanumeric characters and the symbols . = * + _
-
$
! ? / ' ( )
can be entered (up to 60 characters).
"SIP Domain Name": Enter the SIP domain name.
Alphanumeric characters and the symbols . and -
can be entered (up to 128 characters).
Note
Enter a standards-compliant value. For
details,
contact your network administrator.
"Digest Authentication": Use [
][ ] to select
whether to enable digest authentication.
"ON": Enables digest authentication.
"OFF" (default):
Disables digest authentication.
"Authentication ID": Enter an authentication ID
(1–60 characters [alphanumeric, space, symbols])
(Page 137). &, <, >, comma (,), double quotation
mark (") cannot be entered.
"Authentication Password": Enter an
authentication password (0–60 characters
[alphanumeric, space, symbols]) (Page 137). &, <,
>, comma (,), double quotation mark (") cannot be
entered.
Note
To communicate using a SIP server, "ON"
must be selected and "SIP Server
Address", "SIP Username", and "SIP
Domain Name" must be set. For details,
contact your network administrator.
"Authentication ID" and "Authentication
Password" can only be set when "Digest
Authentication" is set to "ON".
While being entered, the characters of the
authentication password are displayed, but
once the settings are saved, all the
characters
will be displayed as asterisks (*),
and you will no longer be able to check the
authentication password on the screen.
Record the authentication password
beforehand, and store it in a safe location.
When the authentication password is
displayed as asterisks (*), pressing [Y]
deletes the entire authentication password.
"SIP Transport Protocol": Press [Enter] and then
use [
][ ] to select between protocols (UDP,
TCP, Auto (Switch by Site), or Auto (TCP /
UDP) [default]) used when communicating via SIP.
Note
When Auto (Switch by Site) is selected,
TCP will be used if using a SIP server, and
UDP will be used if not using a SIP server.
When Auto (TCP / UDP) is selected,
communication
will be attempted in order of
TCP and then UDP. Normally, select Auto
(TCP / UDP).
5. Press [G].
A dialogue box to confirm the saving of settings
is displayed.
6. Use [
][ ] to select "Yes" and press [Enter].
The administrator menu screen is displayed.
7. Press [Home].
The Home screen is displayed.
Document Version 2013-09 User Manual 117
Contacts and Settings
117


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic KX-VC300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic KX-VC300 in the language / languages: English as an attachment in your email.

The manual is 3,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info