628266
116
Zoom out
Zoom in
Previous page
1/172
Next page
"H.323": Use [ ][ ] to select "ON" (default) or
"OFF".
Note
When "OFF"
is selected, you cannot use a
gatekeeper and H.460 even if "ON" is
selected for "Gatekeeper" and "H.
460" (Page 118).
"Default Call Type": Use [
][ ] to select
"SIP" (default) or "H.323".
Note
The call type that you select here will be
reflected
in the information displayed on the
Home screen and in the default value of the
call type when making a video conference
call.
5. Press [G].
A dialogue box to confirm the saving of settings
is displayed.
6. Use [
][ ] to select "Yes" and press [Enter].
The administrator menu screen is displayed.
7. Press [Home].
The Home screen is displayed.
Making SIP Settings
When using a SIP server over an intranet, video
conference
calls can be made using SIP URIs (SIP user
name@SIP domain name).
Note
These settings can only be made in IP mode
(Page 115) and when "SIP" is set to "ON" on
the call type settings screen.
Video conference calls to an MCU or a
non-Panasonic video conference system
through a SIP server using a SIP URI are not
guaranteed.
When connecting to an MCU by entering the
MCU’s conference room number@IP address,
"SIP Server" and "Gatekeeper" (Page 118)
must be set to "OFF".
If video conference calls cannot be made
because
there is a problem with the SIP server,
the SIP settings are incorrect (on the server, or
on the unit), etc., "Not registered" will be
displayed on the Home screen instead of the
SIP user name. In this case, you cannot make
calls using either IP addresses or SIP. Contact
your network administrator.
1. Log in to the administrator menu
(Page 112).
The administrator menu screen is displayed.
2. Press [
].
The second page is displayed.
3. Use [
][ ] to select "SIP Settings" and press
[Enter].
The SIP setting screen is displayed.
4. Use [ ][ ]
to select the following items for input:
"SIP Server": Use [
][ ] to select "ON" or
"OFF" (default).
Note
To communicate using a SIP server, "ON"
must be selected and "SIP Server
Address", "SIP Username", and "SIP
Domain Name" must be set.
To select "ON", "Gatekeeper" (Page
118)
must be set to "OFF".
"SIP Server Address": Enter the SIP server’s IP
address (or host name).
Note
If the IP address contains 1 or 2 digit
numbers,
enter these numbers as they are.
Do not enter like [.001].
Example: The IP address is [192.168.0.1].
Correct entry: [192.168.0.1]
Wrong entry: [192.168.000.001]
The DNS server setting is necessary to
enter host names (Page 97).
See Page 40 for details about the
characters that can be input for host names.
116 User Manual Document Version 2013-09
Contacts and Settings
116


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic KX-VC300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic KX-VC300 in the language / languages: English as an attachment in your email.

The manual is 3,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info