106
Before Requesting Help
Problem
“ ” flashes and an alarm tone sounds
when you press .
A busy tone sounds when you
press .
“ ” flashes during a conversation and
the call is disconnected.
Static, sound cuts in/out, fades.
Interference from other electrical units.
The handset does not ring.
The base unit does not ring.
You cannot dial.
You cannot redial.
You cannot program function items such
as the handset ringer volume.
You cannot store a name and phone
number in the phonebook.
Remedy
•You are too far from the base unit. Move closer and
try again.
•Plug in the AC adaptor.
•Another handset is in use.
•Base unit is in the talk mode.
•The handset is out of range. Move closer to the base
unit and make the call again.
•Plug in the AC adaptor.
•Locate the handset and base unit away from other
electrical appliances (p. 5).
•Move closer to the base unit.
•Turn the power ON (p. 15).
•The ringer is set to OFF. Select the desired volume
level (p. 55).
•The ringer is set to OFF. Set to HIGH, MEDIUM or
LOW (p. 70).
•The unit is in the call prohibition mode. Cancel the
mode (p. 62).
•The dialled number is restricted. Cancel the number
(p. 74).
•Key lock mode is set. Cancel the mode (p. 48).
•If the last number dialled was more than 24 digits
long, the number will not be redialled.
•Programming is not possible while the unit is in the
talk.
•Do not pause for over 60 seconds while
programming.
•You cannot store a name and phone number while
the unit is in the talk mode.
•Do not pause for over 60 seconds while storing.
Cordless Telephone
KX-TCD735EM(E)-5(101~114) 01.10.22 16:17 Page 106