424269
65
Zoom out
Zoom in
Previous page
1/86
Next page
8. Options
63
L All the registered handset numbers are
displayed and the pre-selected handset
number flashes.
7 Press the desired handset number(s).
L The selected handset number(s) will
flash.
L To cancel a selected handset number,
press the number again. The number will
stop flashing.
8 Press {>} or {j}.
9 Press {ih}.
Setting the selected handset(s) then all
handsets to ring
1 Press {j}.
2 Press {e} or {v} repeatedly to display
SETTING BS.
3 Press {>}.
L INPUT CODE will be displayed.
4 Press {1}.
5 Enter the 4-digit base unit PIN.
L The default PIN is 0000.
6 Press {3} to select 3.
L All the registered handset numbers are
displayed and the pre-selected handset
number flashes.
7 Press the desired handset number(s).
L The selected handset number(s) will
flash.
L To cancel a selected handset number,
press the number again. The number will
stop flashing.
8 Press {>}.
9 Press the desired number of rings for the
selected handset(s) from 1 to 6, using the
dial keypad.
L The default setting is 3.
L The selected number of rings will be
shown on the right edge of the display.
10 Press {>} or {j}.
11 Press {ih}.
8.4 Intercom between
handsets
You can use your handsets as a 2-way intercom.
L Keep the front cover page open for button
locations.
Example: When handset 1 calls handset 2
1. Handset 1:
Press {INT} and {2} (desired handset
number).
2. Handset 2:
Press {C} to answer.
3. When finished talking, press {ih}.
Note:
L Intercom calls can be conducted within the
radio cell of the current base unit, but not with
units in neighbouring radio cells.
8.5 Transferring calls
between
handsets/Conference call
Intercom can be used to transfer an external call
between handsets that are registered to the
same base unit.
L Keep the front cover page open for button
locations.
Example: When handset 1 transfers a call to
handset 2
1. Handset 1:
During an external call, press {INT} and {2}
(desired handset number).
L If there is no answer, press {INT} to return
to the external call.
2. Handset 2:
Press {C} to answer the page.
L Handset 2 can talk with handset 1.
L The external call will be put on hold.
3. Handset 1:
To complete the call transfer, press {ih}.
OR
To establish the conference call, press {3}.
To transfer a call directly, without speaking to
handset 2
After step 1, press {ih} on handset 1.
If the transferred call is not answered within 30
seconds, handset 1 will ring again.
FC195E.book Page 63 Wednesday, March 5, 2003 7:15 PM
65


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic kx fc 195 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic kx fc 195 in the language / languages: English as an attachment in your email.

The manual is 7,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info