424269
67
Zoom out
Zoom in
Previous page
1/86
Next page
9. Help
65
L The ink film is slack or creased. Tighten it
(see step 5 on page 15).
DIRECTORY FULL
L There is no space to store new entries in
navigator directory. Erase unnecessary
entries (page 32).
FAXINMEMORY
L The unit has a document in memory. See the
other displayed message instructions to print
out the document.
FAX MEMORY FULL
L The memory is full of received documents
due to a lack of recording paper or a
recording paper jam. Install paper (page 17)
or clear the jammed paper (page 69).
L When performing memory transmission, the
document being stored exceeded the
memory capacity of the unit. Transmit the
entire document manually.
HANG UP HANDSET
L Handset(s) is not hung up. Press {ih} on
the handset(s).
MEMORY FULL
L When making a copy, the document being
stored exceeded the memory capacity of the
unit. Press {STOP} to clear the message.
Divide the document into sections.
MESSAGE FULL
L There is no room left in memory to record
voice messages. Erase unnecessary
messages (page 44, 48).
MODEM ERROR
L There is something wrong with the modem
circuit. Contact our service personnel.
NO FAX REPLY
L The other partys fax machine is busy or has
run out of recording paper. Try again.
PAPER JAMMED
L A recording paper jam occurred. Clear the
jammed paper (page 69).
PLEASE WAIT
L The unit is checking that there is no slack or
crease on the ink film. Wait for a moment
while the check is completed.
POLLING ERROR
L The other partys fax machine does not offer
the polling function. Check with the other
party.
REDIAL TIME OUT
L The other partys fax machine is busy or has
run out of recording paper. Try again.
REMOVE DOCUMENT
L The document is jammed. Remove the
jammed document (page 71).
SEND CANCELLED
L You pressed {C} while the unit was in redial
mode for fax transmission. The redialling was
cancelled.
TRANSMIT ERROR
L A transmission error occurred. Try again.
UNIT OVERHEATED
L The unit is too hot. Let the unit cool down.
Frequently As ked Questions
9.3 When a function does
not work, check here
If you still have difficulties after following the
instructions in this section, reset the unit.
Disconnect the mains lead and turn off the
handset. Remove the batteries, then re-insert
them. Reconnect the mains lead and turn on the
handset.
9.3.1 General
I cannot make and receive calls.
L The mains lead or telephone line cord is not
connected. Check the connections.
L If you used a splitter to connect the unit,
remove the splitter and connect the unit to the
wall socket directly. If the unit operates
properly, check the splitter.
The unit does not work.
L Disconnect the unit from the telephone line
and connect the line to a known working
telephone. If the working telephone operates
FC195E.book Page 65 Wednesday, March 5, 2003 7:15 PM
67


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic kx fc 195 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic kx fc 195 in the language / languages: English as an attachment in your email.

The manual is 7,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info