562293

Paintmaxx Z 04311 - Q1P-WT01-100 Manual

26
Zoom out
Zoom in
Previous page
1/59
Next page
26
9. Once you have set the right amount of paint and jet of paint, direct the device at the surface
which is to be sprayed with paint at a distance of 10 to 30 cm. Press the trigger and move the
device horizontally or vertically at a uniform speed. The faster the movement, the thinner
the coat of paint. Always hold the nozzle parallel to the surface so that no paint tears (noses)
form.
CORRECT WRONG
10. Only release the trigger once the surface has been completely covered by the coating
material. Do not interrupt the spraying process in order to prevent spotting!
11. Only apply one coat of the coating material per spray operation. Let it dry before applying
a second coat. Please follow the information provided by the manufacturer of the coating
material on drying time.
12. To switch off the device, let go of the spray trigger and move the On / Off switch to the
position 0.
13. Clean the device after use as described in the "Cleaning and Maintenance" chapter.
Cleaning and Maintenance
PLEASE NOTE!
❐ Remove the plug from the mains socket before cleaning the device.
❐ Never immerse the basic unit, the mains cable or the plug in water or other liquids.
❐ Do not clean the device with fl ammable substances whose fl ash point is below 21 °C.
❐ Never try to remove dried-on paint residues using sharp objects.
❐ Do not use corrosive or abrasive cleaning agents to clean the device.
The device must be thoroughly cleaned immediately after each use as dried-up
residues of the coating material can stop the device from working properly. Carry
out the following steps after each time you use the device:
1. Make sure that the mains plug has been pulled out!
2. Unscrew the paint container and empty it.
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Paintmaxx Z 04311 - Q1P-WT01-100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Paintmaxx Z 04311 - Q1P-WT01-100 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info