562293

Paintmaxx Z 04311 - Q1P-WT01-100 Manual

24
Zoom out
Zoom in
Previous page
1/59
Next page
24
Coating material Time in seconds
Paints containing solvents 15–20
Emulsion paint 20–25
Priming paints 25–30
Wood preservatives
do not need to be thinned
down
Stains
do not need to be thinned
down
8. If it takes longer for the coating material to pass through, it needs to be thinned down a little
more. Mix in a little more of the corresponding thinner and then check the viscosity again in
the manner described above. Repeat this as often as you need to until the correct viscosity
has been reached.
Applying Paint
PLEASE NOTE!
❐ When screwing on and unscrewing the paint container and when adjusting the paint jet, the
device must not be connected to the mains power.
❐ Make sure that the spray trigger is not pressed when you connect the device to a plug
socket!
❐ Always hold the spray gun horizontally when it is full of paint in order to prevent any escape
of the coating material.
❐ If there are any lumps or other particles in the coating material, these need to be fi ltered out
before the paint is poured into the paint container of the spray-paint gun.
1. Unscrew the paint container from the device and pour in the (lump-free and correctly
thinned-out) coating material. Fill the container with a maximum of 800 ml of paint.
2. Carefully screw the paint container onto the device and then connect it to a properly
installed plug socket. Please be careful to make sure you do not accidentally press
the spray trigger!
3. Set the type of paint jet. To do this, loosen the black plastic ring in front of the spray nozzle,
set the nozzle as shown in the following pictures and screw the plastic ring tight again.
A Horizontal fl at jet, for vertical working direction (for larger areas)
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Paintmaxx Z 04311 - Q1P-WT01-100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Paintmaxx Z 04311 - Q1P-WT01-100 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info