562293

Paintmaxx Z 04311 - Q1P-WT01-100 Manual

23
Zoom out
Zoom in
Previous page
1/59
Next page
23
Use
Preparation
PLEASE NOTE!
❐ Please note! This device generates a volume of up to 93.8 dB. For this reason, wear
suitable hearing protection!
❐ Wear a face mask for your own safety.
❐ Wear protective goggles for your own safety.
❐ Wear work gloves when you work with the device!
❐ The device is suitable for use with a large number of coating materials (e. g. wall paints and
wood preservatives). Make sure you note the manufacturer's instructions when purchasing
a coating material as it must be suitable for use with spray-paint guns and the fl ash point of
the product must be above 21 °C.
❐ Do not use any texture paint! This would clog up the nozzle.
1. Put on work clothing (with long sleeves and long trousers) and place a respiratory mask and
protective goggles on your face.
2. To achieve a good end result, the surface which is to be sprayed with paint should be free
of any kind of unevenness.
3. Ensure that the surface which is to be sprayed with paint is clean and free of any dust and
grease.
4. Carefully cover and stick down any areas which are not to be sprayed (including fl oor areas!).
Use high-quality cover material and adhesive tape so that there is no possibility of any paint
penetrating through possible holes and points which are not sealed.
5. Stir through the coating material and ensure that it does not contain any lumps or other
particles.
6. Most commercially available coating materials are mixed for application with a brush or
a roller and they need to be thinned down for use with a spray-paint gun. Follow the
manufacturer's instructions on this.
7. You can use the viscosity measuring cup which is also supplied
to check whether the coating material has the right viscosity.
Fill the cup up to the top with the coating material, hold it over
the container with the rest of the coating material and measure
the time it takes until it has run through. Below you will fi nd the
recommended times for various coating materials:
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Paintmaxx Z 04311 - Q1P-WT01-100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Paintmaxx Z 04311 - Q1P-WT01-100 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info