562293
28
Zoom out
Zoom in
Previous page
1/59
Next page
28
Troubleshooting
If the device should stop working properly, rst check whether you are able to correct the
problem yourself. If you are not, contact the customer service department.
Do not try to repair a faulty device yourself!
Problem Possible Cause / Solution
The device does not
work.
Is the plug inserted in the mains socket correctly?
Is the mains socket defective?
Try another mains socket.
Check the fuse of your mains connection.
Is the cable or the plug defective?
Is the On / Off switch in position I?
No paint emerges from
the spray nozzle.
Is the On / Off switch in position I?
The spray nozzle is blocked. Clean it.
The air hose is not correctly attached. Check the hose
connections.
The air hose is blocked. Clean it.
The paint container is not correctly screwed onto the spray
gun.
The adjusting wheel for controlling the amount of paint is
tightened too much. Release it a little.
The coating material
is dripping out of the
spray nozzle.
The spray nozzle is loose. Tighten the black plastic ring around
the spray nozzle.
Paint is building up behind the spray nozzle. Clean the spray
nozzle and try again.
Too much of the
coating material is being
applied.
The amount of paint is not set correctly. Turn the adjusting
wheel to regulate the amount of paint released.
The coating material is too runny. Check the viscosity (see the
"Use" chapter, section "Preparation").
Paint tears (noses) are
forming on the object
which you want to coat
with paint.
The amount of paint is not set correctly. Turn the adjusting
wheel to regulate the amount of paint released.
The coating material is too runny. Check the viscosity (see the
"Use" chapter, section "Preparation").
The spray gun is too close to the surface. Stand further back.
The paint jet is
emerging "in pulses".
The paint container is almost empty. Re ll it.
The air hose is blocked. Clean it.
Poor atomisation of the
coating material.
The amount of paint is not set correctly. Turn the adjusting
wheel to regulate the amount of paint released.
The coating material is too thick. Check the viscosity (see the
"Use" chapter, section "Preparation").
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Paintmaxx Z 04311 - Q1P-WT01-100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Paintmaxx Z 04311 - Q1P-WT01-100 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info