812558
41
Zoom out
Zoom in
Previous page
1/56
Next page
3.11 Assembly G: Rear Wheels
3.11.1 Adjusting the Rear Wheels/Rear Wheel Adapters
INFORMATION
If the rear wheel size is changed, then the knee lever wheel lock must be readjusted as well (see section "Adjusting
the wheel lock").
INFORMATION
Changing the rear wheel position also changes the angle between the caster axles and the ground. Also
replace/change the installation position of the caster wheels if necessary (see section "Replacing and changing the
installation position of the caster wheels").
All instructions concerning the adjustment of the rear wheels/real wheel adapters are included in the Instructions for
Use (qualified personnel) – order number 647G585.
3.11.2 Rear Wheel Adapter, Standard
3.11.2.1 Replacing the Rear Wheel Adapter, Standard
The rear wheel adapter, standard, can be installed horizontally in 7 positions.
The rear wheel adapter is marked for installation true to side as follows:
>L = Install in travel direction on the left side of the frame
>R = Install in travel direction on the right side of the frame
1) Unscrew and remove the Allen head screws with lock rings on the frame (see Fig. 125, item 1).
2) Remove/replace the rear wheel adapter.
3) Move the rear wheel adapter from inside into the desired position (see Fig. 126).
4) In order to be able to install the rear wheel adapter even more forward (for very active settings):
remove the rear wheel adapter (see Fig. 127),
turn the rear wheel adapter on its own axle 180° (see Fig. 128),
before installation exchange the left rear wheel adapter for the right.
5) Insert the lock rings and tighten the Allen head screws to 7 Nm.
Once changed, the left and right rear wheel adapter must have the same horizontal position on the frame.
125 126
4102/2011
Service Work
Downloaded from www.Manualslib.com manuals search engine
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Otto Bock Avantgarde CV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Otto Bock Avantgarde CV in the language / languages: English as an attachment in your email.

The manual is 10.32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info