812558

Otto Bock Avantgarde CV Manual

39
Zoom out
Zoom in
Previous page
1/56
Next page
115 116
3.10.4 Replacing the Caster Fork
1) Loosen/remove the size 19 hex nut inside the caster fork.
2) Remove the caster fork from the threaded bolt (caster axle) and replace (see Fig. 117).
3) Set the caster fork onto the threaded bolt.
4) Retighten the hex nut with 25 Nm.
117 118
3.10.5 Replacing the Eccentric Disc
1) Unscrew/remove the Allen head screw on the eccentric (see Fig. 118).
2) Remove/replace the eccentric disc.
3) To reassemble, perform these steps in reverse order. Tighten the screw connection to 6Nm.
3.10.6 Retrofitting the Caster Fork System Frog Legs (spring-mounted)
1) Unscrew/remove the caster head mounting on the frame (2x size 6 Allen head screws) (see Page 36).
2) Remove the caster head adapter and the caster head.
3) Install the frog legs installation unit (caster head, frog legs caster fork: see Fig. 119) on the frame using 2 size 6
Allen head screws. In doing so, install the longer screw in the rear in travel direction.
4) Tighten the Allen head screws to 6Nm.
5) Finally, adjust the caster wheel journal angle (see Fig. 120; see Page 37).
3902/2011
Service Work
Downloaded from www.Manualslib.com manuals search engine
… 39 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Otto Bock Avantgarde CV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Otto Bock Avantgarde CV in the language / languages: English as an attachment in your email.

The manual is 10.32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info