Manual Otto Bock Avantgarde CV (page 37 of 56) (English)

812558

Zoom out

Zoom in

1/56

107 108

3.10.2 Adjusting the Caster Wheel Journal Angle

The threaded axle in the caster wheel adapter should be perpendicular to the ground to ensure optimum rolling beha

viour of the wheelchair. The caster wheel adapter permits a continuous adjustment of this angle.

1) Remove the protective cap.

2) Slightly loosen the Allen head screw on the eccentric (see Fig. 109).

3) Slightly loosen the Allen head screws on the inside of the frame (see Fig. 110).

4) Position the spirit level (see Fig. 111, item 1).

5) Adjust the caster angle to 90° with a wide flat screwdriver. The spirit level must be in the centre position to do so

(see Fig. 111, item 2).

6) Tighten the Allen head screw on the eccentric to 8 Nm (CLT: 5.5 Nm) (see Fig. 112).

7) Tighten the Allen head screws on the inside of the frame to 23 Nm (CLT: 13 Nm).

→The threaded axle on both caster wheel adapters must be positioned vertically.

109 110

3702/2011

Service Work

Downloaded from www.Manualslib.com manuals search engine

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Otto Bock Avantgarde CV in the language / languages: English as an attachment in your email.

The manual is 10.32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Otto Bock Avantgarde CV Manual

Product: