Manual Otto Bock Avantgarde CV (page 43 of 56) (English)

812558

Zoom out

Zoom in

1/56

131 132

3.11.3 Shock Absorber System

3.11.3.1 Retrofitting the Shock Absorber

The shock absorber system is clamped to the frame and is continuously adjustable as a result.

1) Remove the rear wheel adapter, standard (see Page 41).

2) Pre-install the upper shell on the shock absorber (see Fig. 133):

→To do so, insert the 2 size 10 hex nuts into the shell's profile.

→Bolt on the size 5 Allen head screws – do not tighten.

3) Guide the shock absorber true to side at the proper clearance onto the frame from outside (see Fig. 134):

→The elastomer is situated above.

→The fitting position is – as required – toward the front or rear.

4) Pre-install the lower shell (see Fig. 135).

5) Adjust the shock absorber depth. Use the bores in the frame for orientation (see Fig. 136, item 1).

6) Tighten the clamping screws to 8 Nm (see Fig. 136, item 2).

→Once changed, the left and right shock absorber must have the same horizontal position on the frame.

133 134

4302/2011

Service Work

Downloaded from www.Manualslib.com manuals search engine

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Otto Bock Avantgarde CV in the language / languages: English as an attachment in your email.

The manual is 10.32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Otto Bock Avantgarde CV Manual

Product: