668497
11
Zoom out
Zoom in
Previous page
1/51
Next page
11
3.2 Connection at the Level board
3.2.1 Inputs
Battery Supply input Connection for Supply at X1 via 8 pole header X17 main board.
Encoder The encoder is attached at the back of the rotor at the level motor.
With this encoder we check the direction and speed of this motor.
Connection at X7
Can Bus Communication between Main, Level and sensor control board.
Connection to the Sensor Control Board with the flat cable through
X4.
Connection towards the Main board X16 through header at X2.
Dual safety line A B The safety-line result of Tilt sensor and sensor control board.
Connected through flat cable at X5
Relay voltage Result main board safety-line (controlled & safety switches OK).
Output at Main board X16 connected via 8-pole header to X2 level
board.
3.2.2 Outputs
Motor output 3x 24V for controlling the 0,065 kW synchronous motor
Battery Supply output Fused supply for Sensor Control Board and its sensors.
Connected through flat cable at X5.
Dual safety line result The safety-line result of Tilt sensor, sensor control board and level
board.
The result of status safety line also depends on main board relay
voltage.
When there is no relay voltage the level board will not / can not
switch the dual safety line ON.
Connected towards the main board through the BtB cable (X15
bypass)
LED 3 LED’s for
Status processor (LED1 / orange)
Status safety-line (LED 2 / red)
Controlled and error (LED 3 / green).
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Otolift One at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Otolift One in the language / languages: English as an attachment in your email.

The manual is 4,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info