668497
10
Zoom out
Zoom in
Previous page
1/51
Next page
10
3.1.5 Outputs
Motor output 3x 11V for controlling the 0,35 kW synchronous motor
Brake 22~29V output for controlling the holdbrake.
Battery Supply output Connection for batt. Supply to X1 level board via 8 pole header X17.
Supply output +/-24Vdc 1 4A current limited 22~29V output. Only used in 2 tube applications.
Supply output +/-24Vdc 2 2A (max) 22~29V output for powering
the PCB for Electrical powered footrest (type 2000) or
the PCB for the Electrical powered swivel seat (type 3000 / 4000)
Output at connector x11 pin 1
Logic switched output 1 When dipswitch 2 = OFF, output active on upper and lower endpoint
when operated into the direction of this endpoint.
When dipswitch 2 = ON, output only active on right endpoint when
operated towards this endpoint.
Output at connector x11 pin 3
NOTE Dipswitch ON settings are used to control the Electrical
Powered swivel seat
Logic switched output 2 When dipswitch 2 = OFF, output active only when swivel switch
and armrest-contact are closed and control is operated.
When dipswitch 2 = ON, output always active when control is
operated , except when the lift at the right endpoint.
Output at connector x12 pin 1
NOTE Dipswitch ON settings are used to control the Electrical
powered swivel seat.
Relay voltage Result mainboard safety-line (controlled & safety switches OK).
output at X16 and connected via 8-pole header to X2 levelboard.
LED on armrest 6V/20mA See function of LED in the armrest ( chapter 10.2)
(wiring connected to x2b
-3,4)
Beeper (buzzer) on PCB See function of beeper (chapter 10.3)
1-segment display Shows failure (report) to installer/technician
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Otolift One at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Otolift One in the language / languages: English as an attachment in your email.

The manual is 4,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info