796577
5
Zoom out
Zoom in
Previous page
1/80
Next page
EN
5
1. Prepare a wooden board, a metal mount bracket
with the sensor installed and four pairs of Type
A screws without flat washers and lock washers
(figure 10).
2. Position the metal mount bracket on the wooden
board by securely tightening the Type A screws
using some tools (figure 11).
3. Securely locate the wooden board in your desired
outdoor area.
CABLE CONNECTIONS
Please connect the cable of the thermometer &
humidity sensor to the transmitter box before positioning
the pole or wooden board.
1. Unscrew to open the
transmitter box.
2. Take off the rubber
stopper from the
cable slot.
3. Insert the sensor
cable through the
cable slot.
4. Plug the thermometer
& humidity sensor
cable into TH socket
that has name below
the socket for
recognition. A click
sound can be heard.
5. Return the rubber stopper to the cable slot.
NOTE
Route the excessive cable neatly if necessary.
TRANSMITTER BOX-
BATTERY INSTALLATION
The solar panel on the transmitter box is an
energy-saving feature, designed to provide power
to the sensors to prolong battery life and reduce
environmental impact. The sensor should be able to
operate entirely on the rechargeable battery power.
Place the transmitter box in direct sunlight for optimal
power supply to the panel.
The rechargeable battery that is charged by the solar
panel likely has diminished power by the time you set
up your sensor. We recommend that you charge it for
several hours using the connected solar panel before
using the sensor.
RAIN
SOLAR
UVTHWIND
T
&
H
RAINTHWIND
T
&
H
SOLAR
UV
You can also purchase a power adapter separately for
directly providing power to the
transmitter box. The output
voltage of the power adapter
is 3V. Route the adapter cable
through the cable slot.
Please check the solar
panel connection. If it is
not firmly plugged, please
re-connect the solar panel:
Plug the end of the color-corded connector into the
corresponding socket in the transmitter box as shown
below and place the wires neatly inside the box.
To install the rechargeable battery:
Insert the battery into the battery compartment,
matching the polarity +/-.
polarity +
CHANNEL SETTING
Your weather station
system (WMR300) can
expand to up to 8 sets of
thermometer & humidity
sensors (THGN301), and
one of each of wind and
rain sensors (WGR300 or
PCR300), all of which display their information on one
main unit. You can number each transmitter box with an
independent channel ID (1-8) by sliding the switches.
Please follow the below chart to adjust the sliding
switches of SW1:
NOTE
The below 0 in the chart represents off and 1
represents on.
ON
1 2 3 4
RSN
SW1
1
0
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oregon Scientific THGN301 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific THGN301 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 23.95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info