492720
21
Zoom out
Zoom in
Previous page
1/35
Next page
© Calibre UK Limited Issue 2.00 30 March 2012, W: www.calibreuk.com
T:+44 1274 394125 F: +44 1274 730960 E: techsupport@calibreuk..com 17
3.5.8. Output Config
This Menu provides items to configure the output port.
Sync Mode
The VGA output port can be operated with separate syncs, composite syncs and Sync-On-Green.
Internally, the display interface processes data at a full ten bits per colour. A resolution of ten bits per
Optimize for Display
Settings: DVI forced, Optimized, DVI/HDMI
Internally, the display interface processes data at a full ten bits per colour. A resolution of ten bits per
colour is provided for the VGA output. The colour depth on the DVI-D output is determined by the
supported standard of the attached monitor or device when set to DVI/HDMI. For DVI 1.0 and HDMI
1.1/1.2 devices it is 24 bit, for HDMI 1.3 compliant devices it is up to 36 bit.
DVI forced will output with 24 bit colour depth irrespective of the supported standard of the attached
monitor.
When the Optimized setting is enabled the output resolution is automatically set to the native screen
resolution of the attached display. The colour depth is determined in the same way as when set to
DVI/HDMI.
DVI Colour Space and DVI Range
The colour space of the DVI output port can be set to RGB or YPbPr, the range can be set to Expand,
Normal, Compress and Auto. A limited video range is only using the following greyscale for video
information - 8 Bit System: 0x01 .. 0xFE, 10 Bit System: 0x004 .. 0x03FB. Auto makes the best choice
for the range for the DVI and 3G-SDI output. If the HDMI/DVI output does not behave as expected, e.g.
because the HDMI display is not evaluating AVInfoFrames properly, the range can be changed
manually.
Frame Rates
Settings: 60/50 Hz, 60/50/24 Hz, 60/50/48, 60/50/24/48
Limits the possible output frame rates for the Auto refresh rate configuration discussed in paragraph
3.5.3.
3G-SDI Data Map
720p and 1080i HD-SDI data can be output in YCbCr 4:2:2, YCbCr 4:4:4 or RGB 4:4:4 mode.
3GSDI data can be output as Level A or B data.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Optoma HQView-500 Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Optoma HQView-500 Series in the language / languages: English as an attachment in your email.

The manual is 1,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info