492720
19
Zoom out
Zoom in
Previous page
1/35
Next page
© Calibre UK Limited Issue 2.00 30 March 2012, W: www.calibreuk.com
T:+44 1274 394125 F: +44 1274 730960 E: techsupport@calibreuk..com 15
3.5.2. Output Mode
Settings: 640x480, 800x600, 1024x768, 1280x768, 1280x800, 1280x1024, 1360x768, 1366x768,
1400x1050, 1440x900, 1600x1200, 1680x1050, 1920x1200, 480i, 576i, 480p, 576p, 1080i, 720p,
1080p
Set up the desired output resolution with output mode. The output mode setting should match the
native resolution of the imaging device to avoid double scaling.
The 3GSDI output does not feature the PC mode resolutions, only 480i/p, 576i/p, 720p and 1080i/p
output modes are supported. Available SDI output modes are indicated by an SDI connector symbol in
the output mode selection list box of the OSD. SDI output modes not supported are indicated with this
symbol crossed out red.
The default output resolution as set by the factory or after a user issued factory reset is 640x480. If
only a SDI capable monitor is connected no image is displayed and consequently the output resolution
cannot by changes through the OSD. Pressing the Menu/Contrast up/Contrast down key combination
will switch the output resolution from 640x480 to 480i which SDI monitors should be capable to display.
If a DVI or VGA monitor has issues to display this 480i mode, by pressing the key combination again
the 640x480 output mode is set-up which all DVI and VGA monitors should be capable to display.
3.5.3. Location
Settings: Front Tabletop, Front Ceiling, Rear Tabletop, Rear Ceiling
The image can be flipped to accommodate different projection scenarios as well as screens mounted
upside down.
3.5.4. Frame Rate
Settings: 60 Hz, 50 Hz, 48 Hz, 24 Hz, Auto
In auto mode the output frame rate follows the input frame rate as configured in the Output Config
menu. Signals with 24Hz, 25H, 48Hz, 50Hz (plus margin) input modes get special treatment, modes
with other refresh rates are displayed at 60Hz. 24Hz input modes will be output at 24Hz if the output
resolution is set to either 720p or 1080p and the Frame Rate setting in the Output Config menu
includes 24Hz, otherwise it is displayed at twice the rate if the Frame Rate setting in the Output Config
menu includes 48Hz. Otherwise a 24Hz input mode is displayed at 60Hz. 48Hz input modes will be
output at 48Hz if the Frame Rate setting in the Output Config menu includes 48Hz. Otherwise it is
displayed at 50Hz. A 25Hz input mode is output at twice the frame rate 50Hz. An exception to the
24/25Hz input mode treatment is if the output resolution is set to 480i or 480p. 480i and 480p are
always run at 60Hz output rate. 50Hz input modes are displayed at 50Hz output rate.
The output frame rate can also manually set to 24Hz, 48Hz, 50Hz or 60Hz if possible, i.e. such output
modes are available. Only 720p and 1080p output modes are available with 24Hz refresh rate. 480i
and 480p output modes are only available at 60Hz refresh rate. For all other modes 48Hz, 50Hz and
60Hz refresh rate is available.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Optoma HQView-500 Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Optoma HQView-500 Series in the language / languages: English as an attachment in your email.

The manual is 1,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info