63833
115
Zoom out
Zoom in
Previous page
1/124
Next page
115
Controlling Other Components—Continued
You can program the remote controller’s MACRO but-
tons to perform a sequence of remote control actions.
Example:
To play a CD you typically need to perform the follow-
ing actions:
1. Press the [RECEIVER] button to select the Receiver
remote controller mode.
2. Press the [ON/STANDBY] button to turn on the AV
receiver/AV amplifier.
3. Press the [CD] button to select the CD input source.
4. Press the Play [1] button to start playback on the
CD player.
You can program a MACRO button so that all four
actions are performed with just one button press.
Making Macros
Each MACRO button can store one macro, and each
macro can contain up to 32 commands.
Note:
If any of the buttons you used to make a macro are taught
new commands, the macro will no longer work properly
and will have to be made again.
Running Macros
Deleting Macros
Using Macros
1
(3 seconds)
While holding down the
[RECEIVER] button, press and
hold down the MACRO button [1]
or [2] until the [RECEIVER] but-
ton lights up (about 3 seconds).
2
Press the buttons whose actions
you want to program into the
macro in the order you want them
performed.
For the CD example above, you’d press
the following buttons: [ON/
STANDBY], [CD], Play [1].
MACRO
1, 2
REMOTE
MODE
RECEIVER
3
When you’ve finished, press the
MACRO button again.
The REMOTE MODE button flashes
twice.
If you enter 32 commands, the process
will finish automatically.
Press the MACRO [1] or [2] but-
ton.
The commands in the macro are trans-
mitted in the order in which they were
programmed. Keep the remote control-
ler pointed at the AV receiver/AV
amplifier until all of the commands
have been transmitted.
Macros can be run at any time, regard-
less of the current remote controller
mode.
1
(3 seconds)
While holding down the
[RECEIVER] button, press and
hold down the MACRO button
whose macro you want to delete
until the [RECEIVER] button
lights up (about 3 seconds).
2
Press the MACRO button again.
The [RECEIVER] button flashes twice.
TX-SR806_En.book Page 115 Monday, August 4, 2008 10:25 AM
115


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-SR806 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-SR806 in the language / languages: English as an attachment in your email.

The manual is 9,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-SR806

Onkyo TX-SR806 User Manual - German - 242 pages

Onkyo TX-SR806 User Manual - Dutch - 242 pages

Onkyo TX-SR806 User Manual - Italian - 242 pages

Onkyo TX-SR806 User Manual - Swedish - 242 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info