63833
114
Zoom out
Zoom in
Previous page
1/124
Next page
114
Controlling Other Components—Continued
The AV receiver/AV amplifier’s remote controller can
learn the commands of other remote controllers. By
transmitting, for example, the Play command from your
CD player’s remote controller, the remote controller can
learn it, and then transmit the exact same command
when its Play [1] button is pressed in the CD remote
mode.
This is useful when you’ve entered the appropriate
remote control code (page 105) but some buttons don’t
work as expected.
Notes:
The following buttons cannot learn new commands:
REMOTE MODE, MACRO [1], [2].
The remote controller can learn approximately 70 to
90 commands, although this will be less if commands
that use a lot of memory are learned.
Remote controller buttons such as Play, Stop, Pause,
and so on are preprogrammed with commands for
controlling Onkyo CD players, cassette decks, and
DVD players. However, they can learn new com-
mands, and you can restore the preprogrammed com-
mands at any time by resetting the remote controller
(see page 106).
To overwrite a previously learned command, repeat
this procedure.
Depending on the remote controller that you are using,
there may be some buttons that won’t work as
expected, or even some remotes that cannot be learned
at all.
Only commands from infrared remote controllers can
be learned.
When the remote controller’s batteries expire, all
learned commands will be lost and will have to be
learned all over again, so don’t discard your other
remote controllers.
Deleting Learning Commands
1. While holding down the REMOTE MODE button
for the mode in which you want to delete the com-
mand, press and hold down the TV [9] button
until the REMOTE MODE button lights up (about 3
seconds).
2. Press the REMOTE MODE button or the button
from which you want to delete the commands.
The REMOTE MODE button flashes twice.
When you press the REMOTE MODE button, all
commands learned in that remote mode will be
deleted.
Learning Commands
1
(3 seconds)
While holding down the REMOTE
MODE button for the mode in
which you want to use the com-
mand, press and hold down the
[ON/STANDBY] button until the
REMOTE MODE button lights up
(about 3 seconds).
2
On the supplied remote control-
ler, press the button you want to
learn the new command.
3
Point the remote controllers at
each other, about 2 to 6 inches
(5–15 cm) apart, and then press
and hold the button whose com-
mand you want to learn until the
REMOTE MODE button flashes.
1
1, 4
If the command is learned successfully,
the REMOTE MODE button flashes
twice.
4
To learn more commands, repeat
steps 2 and 3.
Press any REMOTE MODE button
when you’ve finished. The REMOTE
MODE button flashes twice.
POWER
SLEEP
DIMME
R
SU
R
MODE
VIDEO-1
VIDEO-2
TAP
E
DVD
C D
C
D
DVD
TU
NER
TUN
ER
PHONO
INPUT SELEC
TOR
DISC
VOLUM
E
C
H SEL
PRESET
UT
ING
TE
ST
TONE
MULTI-CH
INPUT
GROUP
About 2 to 6
inches (5–15 cm)
Supplied
remote controller
(
RC-717M
)
TX-SR806_En.book Page 114 Monday, August 4, 2008 10:25 AM
114


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-SR806 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-SR806 in the language / languages: English as an attachment in your email.

The manual is 9,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-SR806

Onkyo TX-SR806 User Manual - German - 242 pages

Onkyo TX-SR806 User Manual - Dutch - 242 pages

Onkyo TX-SR806 User Manual - Italian - 242 pages

Onkyo TX-SR806 User Manual - Swedish - 242 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info