517568
66
Zoom out
Zoom in
Previous page
1/160
Next page
Advanced Operations
En-66
Operating
procedure
( page 61)
*6
This setting cannot be selected if the “Speakers Type
(Front)” setting is set to “Bi-Amp” or “Digital
Crossover”.
*7
If the “11ch Playback” setting is enabled, “None” cannot
be selected.
*8
When the “Powered Zone 3” setting is set to “Yes
( page 65) while Powered Zone 2 is enabled
( page 84), this setting cannot be selected.
*9
When the “Speakers Type(Front)” setting is set to
Bi-Amp” or “Digital Crossover” while Powered Zone 2
is enabled ( page 84), this setting cannot be selected.
Surround Back Ch
` 1ch:
Select if only one surround back speaker L is
connected.
` 2ch
:
Select if two (left and right) surround back
speakers are connected.
Note
If the “Surround Back” setting is set to “None”, this setting
cannot be selected.
LPF of LFE
(Low-Pass Filter for the LFE Channel)
` 80Hz, 90Hz, 100Hz, 120Hz
` Off:
Low-Pass Filter is not applied.
With this setting, you can specify the cutoff
frequency of the LFE channel’s low-pass filter
(LPF), which can be used to filter out unwanted
hum. The LPF only applies to sources that use the
LFE channel.
Note
If you’re using THX-certified speakers, select “80Hz”.
Subwoofer Phase
` 0
º
` 180º:
Moves the subwoofer phase.
Note
If the “Subwoofer” setting is set to “No”, this setting cannot
be selected.
Double Bass
` On
` Off(THX)
Turn this setting on to boost bass output by feeding
bass sounds from the front left, right, and center
channels to the subwoofer. Default setting: “
-----
Note
When the “Subwoofer” setting is set to “No” or the “Front
setting to anything other than “Full Band”, this setting is
fixed to “-----”.
This setting is set to “On” automatically when the
Subwoofer” and “Front” settings are set for the first time
to “Yes” and “Full Band” respectively.
If you’re using THX-certified speakers, select “Off(THX)”.
Speaker Distance
Here you can specify the distance from each speaker
to the listening position so that the sound from each
speaker arrives at the listener’s ears as the sound
designer intended.
Unit
` feet:
Distances can be set in feet. Range: 0.5ft to
30.0ft in 0.5 foot steps.
` meters:
Distances can be set in meters. Range: 0.15m
to 9.00m in 0.15 meter steps.
(The default setting varies from country to country.)
Left, Front Wide Left, Front High Left, Center,
Front High Right, Front Wide Right, Right,
Surround Right, Surround Back Right, Surround
Back Left, Surround Left, Subwoofer
` Specify the distance from each speaker to your
listening position.
Note
Speakers that you set to “No” or “None” in
“Speaker Configuration” cannot be selected ( page 65).
When the “Powered Zone 3 setting is set to “Yes
( page 65) while Powered Zone 2 is enabled
( page 84), the surround back speakers cannot be used.
When the “Speakers Type(Front)” setting is set to
Bi-Amp” or “Digital Crossover” while Powered Zone 2 is
enabled ( page 84), the surround back speakers cannot
be used.
Level Calibration
Here you can adjust the level of each speaker with
the built-in test tone so that the volume of each
speaker is the same at the listening position.
Left, Front Wide Left, Front High Left, Center
*1
,
Front High Right, Front Wide Right, Right,
Surround Right, Surround Back Right, Surround
Back Left, Surround Left
` –12.0dB to 0.0dB to +12.0dB in 0.5 dB steps.
Subwoofer
*1
` –15.0dB to 0.0dB to +12.0dB in 0.5 dB steps.
This setting is NOT set automatically by
Audyssey MultEQ
®
XT32 Room Correction and
Speaker Setup function ( page 28).
This setting is set automatically by
Audyssey MultEQ XT32 Room Correction and
Speaker Setup function ( page 28).
This setting is set automatically by
Audyssey MultEQ XT32 Room Correction and
Speaker Setup function ( page 28).
66


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-NR929 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-NR929 in the language / languages: English as an attachment in your email.

The manual is 4,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-NR929

Onkyo TX-NR929 Quick start guide - English - 4 pages

Onkyo TX-NR929 Quick start guide - German - 4 pages

Onkyo TX-NR929 User Manual - German - 160 pages

Onkyo TX-NR929 Quick start guide - Dutch - 4 pages

Onkyo TX-NR929 User Manual - Dutch - 160 pages

Onkyo TX-NR929 User Manual - French - 160 pages

Onkyo TX-NR929 User Manual - French - 4 pages

Onkyo TX-NR929 User Manual - Italian - 156 pages

Onkyo TX-NR929 Quick start guide - Italian - 4 pages

Onkyo TX-NR929 User Manual - Swedish - 160 pages

Onkyo TX-NR929 Quick start guide - Swedish - 4 pages

Onkyo TX-NR929 User Manual - Spanish - 160 pages

Onkyo TX-NR929 Quick start guide - Spanish - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info