553769
23
Zoom out
Zoom in
Previous page
1/97
Next page
23
Connecting to Audio/Video Equipment—Continued
Using an RCA video connection cable, connect the
video output jack (composite) of the device to the
VIDEO 3 (or 4) VIDEO IN jack of the TX-NR801/
TX-NR801E. Or if the device has an S video output jack,
connect it to the VIDEO 3 (or 4) S VIDEO IN jack of the
TX-NR801/TX-NR801E using an S video connection
cable. Or if the device has component video outputs,
connect them to one of the banks of COMPONENT
VIDEO INPUT jacks on the TX-NR801/TX-NR801E.
On the initial settings of the TX-NR801/TX-NR801E,
the VIDEO 3 and 4 input sources are set for the
COMPONENT VIDEO INPUT 2 jacks.
If you connect the device to the COMPONENT VIDEO
INPUT 1 jacks, this must be changed at Setup Menu
Input Setup Video Setup Component Video (See
page 38).
Using an RCA audio connection cable, connect the
audio output jack of the device to the VIDEO 3 (or 4)
AUDIO IN jacks of the TX-NR801/TX-NR801E. Make
sure that you properly connect the left channel to the L
jack and the right channel to the R jack.
When hooking up a TV with audio outputs, make sure
the TV’s audio output setting. You might have to go
through the TV’s menu and set the TV Fixed audio
output and then internal speakers off.
If the device has a digital output, connect it to either the
DIGITAL IN COAX jack or DIGITAL IN OPT jack of
the TX-NR801/TX-NR801E, depending on the type of
connector on the device.
On the initial settings of the TX-NR801/TX-NR801E,
the VIDEO 3 input source is set for digital input at
the OPT 3 jack.
If the digital connection is made at a different jack, this
must be changed at Setup Menu Input Setup
Digital Setup (See page 36).
On the initial settings of the TX-NR801/TX-NR801E,
the VIDEO 4 input source is not set for digital input. If
you are connecting a digital component, these settings
must be changed at Setup Menu Input Setup
Digital Setup (See page 36).
Using an RCA video connection cable, connect the
video output jack (composite) of the device to the
VIDEO 5 VIDEO jack of the TX-NR801/TX-NR801E.
Or if the device has an S video output jack, connect it to
the VIDEO 5 S VIDEO jack of the TX-NR801/
TX-NR801E using an S video connection cable.
Using an RCA audio connection cable, connect the
audio output jack of the device to the VIDEO 5 AUDIO
jacks of the TX-NR801/TX-NR801E. Make sure that
you properly connect the left channel to the L jack and
the right channel to the R jack.
If the device has an optical digital output, connect it to
the VIDEO 5 DIGITAL jack of the TX-NR801/
TX-NR801E.
The VIDEO 5 digital input is fixed to the OPTICAL
input on the front panel.
Using an RCA audio connection cable, connect the
output jacks of the compact disc player to the CD
AUDIO jacks of the TX-NR801/TX-NR801E. Make
sure that you properly connect the left channel to the L
jack and the right channel to the R jack.
If the compact disc player has a digital output, connect it
to either the DIGITAL IN COAX jack or DIGITAL IN
OPT jack of the TX-NR801/TX-NR801E, depending on
the type of connector on the compact disc player.
On the initial settings of the TX-NR801/TX-NR801E,
the CD input source is set for digital input at the OPT
1 jack.
If the digital connection is made to a different jack, this
must be changed at Setup Menu Input Setup
Digital Setup (See page 36).
Connecting Video Camera, etc.
(VIDEO 5 INPUT)
Connecting a Compact Disc Player
(CD)
R
L
AUDIO OUT VIDEO
OUT
S VIDEO
OUT
DIGITAL
OUT
R
L
R
L
Video camera/ Video
game (VIDEO 5 INPUT)
Front panel
AUDIO
VIDEO
S VIDEO
MONITOR
OUT
R
L
IN
IN
IN
IN
IN
ZONE 2
DVD
VIDEO 1
VIDEO 2
VIDEO 3
VIDEO 4
AUDIO
VIDEO
S VIDEO
COMPONENT
VIDEO
Y
P
B
PR
OUTPUT
INPUT 1
Y
P
B
PR
INPUT 2
Y
P
B
PR
R
L
OUT
OUT
OUT
PHONO
DIGITAL
IN
PRE OUT
DIGITAL
OUT
OPT
OPT
2
1
2
1
2
3
FRONT
SUB
SURR
R
L
AUDIO
R
L
CD
TAPE
R
L
AUDIO
1
3
GND
SURR
BACK/
ZONE 2
IN
OUT
COAX
R
L
MULTI
CH
INPUT
FRONT
SUB
SURR
SURR
BACK
CENTER
RL
R
L
AM
FM
75
CENTER
ANTENNA
IN
IN
CD
IN
RL
1
DIGITAL
IN
OPT
DIGITAL
OUT
OPT
AUDIO
RL
AUDIO OUT
CD player
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-NR801 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-NR801 in the language / languages: English as an attachment in your email.

The manual is 5,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info