553769
21
Zoom out
Zoom in
Previous page
1/97
Next page
21
Connecting to Audio/Video Equipment—Continued
For other models:
Note that the OSD Menu data will be output to the
MONITOR OUT VIDEO, S VIDEO and
COMPONENT VIDEO jacks. When you connect any
OSD-specific monitor TV to the VIDEO connectors, you
can disable the OSD output to COMPONENT VIDEO
OUTPUT. To disable the OSD output, select Setup
Menu Preference OSD Setup Component
Video, and then select “OSD Off” (See page 63).
Using an RCA video connection cable, connect the
video output jack (composite) of the DVD or LD player
to the DVD VIDEO IN jack of the TX-NR801/
TX-NR801E. Or if the DVD or LD player has an S video
output jack, connect it to the DVD S VIDEO IN jack
with an S video connection cable. Or if the device has
component video outputs, connect them to one of the
banks of COMPONENT VIDEO INPUT jacks on the
TX-NR801/TX-NR801E.
On the initial settings of the TX-NR801/TX-NR801E,
the DVD input source is set for the COMPONENT
VIDEO INPUT 1 jacks.
If you connect the DVD or LD player to the
COMPONENT VIDEO INPUT 2 jacks, this must be
changed at Setup Menu Input Setup Video Setup
Component Video (See page 38).
Using an RCA audio connection cable, connect the
audio output jacks of the DVD or LD player to the DVD
AUDIO IN jacks of the TX-NR801/TX-NR801E. Make
sure that you properly connect the left channel to the L
jack and the right channel to the R jack.
If the device has a digital output, connect it to either the
DIGITAL IN COAX jack or DIGITAL IN OPT jack of
the TX-NR801/TX-NR801E, depending on the type of
connector on the DVD player.
On the initial settings of the TX-NR801/TX-NR801E, the
DVD input source is set for digital input at the COAX 1 jack.
If the digital connection is made at a different jack, this
must be changed at Setup Menu Input Setup
Digital Setup (See page 36).
Make sure of your DVD player’s digital output settings.
You need to access the On Screen Menu of your DVD
player. See the owner’s Manual on your DVD player.
Also, you need to aware of the Table of contents for the
movie, selecting the movie for Dolby Digital or DTS,
depends how the movie is encoded.
Using RCA video connection cables, connect the video
output jack (composite) of the video cassette recorder to the
VIDEO 1 VIDEO IN jack of the TX-NR801/TX-NR801E
and connect the video input jack of the video cassette
recorder to the VIDEO 1 VIDEO OUT jack of the
TX-NR801/TX-NR801E. Or if the video cassette recorder
has S video input and output jacks, connect them to the
VIDEO 1 S VIDEO IN and OUT jacks of the TX-NR801/
TX-NR801E using S video connection cables. Or if the
video cassette recorder has component video outputs,
connect them to one of the banks of COMPONENT
VIDEO INPUT jacks on the TX-NR801/TX-NR801E.
On the initial settings of the TX-NR801/TX-NR801E,
the VIDEO 1 input source is set for the
COMPONENT VIDEO INPUT 2 jacks.
If you connect the video cassette recorder to the COMPONENT
VIDEO INPUT 1 jacks, this must be changed at Setup Menu
Input Setup Video Setup Component Video (See page 38).
Using RCA audio connection cables, connect the audio
output jacks of the video cassette recorder to the VIDEO 1
AUDIO IN jacks of the TX-NR801/TX-NR801E and
connect the audio input jacks of the video cassette recorder to
the VIDEO 1 AUDIO OUT jacks of the TX-NR801/
TX-NR801E. Make sure that you properly connect the left
channels to the L jacks and the right channels to the R jacks.
Connecting a DVD Player (DVD)
AUDIO
VIDEO
S VIDEO
MONITOR
OUT
R
L
IN
IN
IN
IN
IN
ZONE 2
DVD
VIDEO 1
VIDEO 2
VIDEO 3
VIDEO 4
AUDIO
VIDEO
S VIDEO
COMPONENT
VIDEO
Y
P
B
PR
OUTPUT
INPUT 1
Y
P
B
PR
INPUT 2
Y
P
B
PR
R
L
OUT
OUT
OUT
PHONO
DIGITAL
IN
PRE OUT
DIGITAL
OUT
OPT
OPT
2
1
2
1
2
3
FRONT
SUB
SURR
R
L
AUDIO
R
L
CD
TAPE
R
L
AUDIO
1
3
GND
SURR
BACK/
ZONE 2
IN
OUT
COAX
R
L
MULTI
CH
INPUT
FRONT
SUB
SURR
SURR
BACK
CENTER
R
L
R
L
AM
FM
75
CENTER
ANTENNA
IN
IN
Y
P
B
PR
Y
P
B
PR
COMPONENT
VIDEO
INPUT 1
COMPONENT
VIDEO
OUTPUT
R
L
IN
DVD
DIGITAL
IN
AUDIO
VIDEO S VIDEO
COAX
1
R
L
DIGITAL
OUT
AUDIO
OUT
VIDEO
OUT
S VIDEO
OUT
COAX
DVD player
Connecting a Video Cassette
Recorder (VIDEO 1)
AUDIO
VIDEO
S VIDEO
MONITOR
OUT
R
L
IN
IN
IN
IN
IN
ZONE 2
DVD
VIDEO 1
VIDEO 2
VIDEO 3
VIDEO 4
AUDIO
VIDEO
S VIDEO
COMPONENT
VIDEO
Y
P
B
PR
OUTPUT
INPUT 1
Y
P
B
PR
INPUT 2
Y
P
B
PR
R
L
OUT
OUT
OUT
PHONO
DIGITAL
IN
PRE OUT
DIGITAL
OUT
OPT
OPT
2
1
2
1
2
3
FRONT
SUB
SURR
R
L
AUDIO
R
L
CD
TAPE
R
L
AUDIO
1
3
GND
SURR
BACK/
ZONE 2
IN
OUT
COAX
R
L
MULTI
CH
INPUT
FRONT
SUB
SURR
SURR
BACK
CENTER
R
L
R
L
AM
FM
75
CENTER
ANTENNA
IN
IN
IN
VIDEO 1
AUDIO
VIDEO S VIDEO
OUT
RL
AUDIO OUT
VIDEO
OUT
S VIDEO
OUT
RL
AUDIO IN
VIDEO
IN
S VIDEO
IN
RL
VCR
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-NR801 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-NR801 in the language / languages: English as an attachment in your email.

The manual is 5,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info