553762
59
Zoom out
Zoom in
Previous page
1/104
Next page
59
En
Audio Return Channel
` Off:
Select “Off” if you don’t want to use audio return
channel (ARC) function.
` Auto
:
The audio signal from your TV tuner can be sent to
the HDMI OUT MAIN of the AV receiver.
Audio return channel (ARC) function enables an HDMI
(Audio Return Channel) capable TV to send the audio
stream to the HDMI OUT MAIN of the AV receiver. To
use this function, you must select the TV/CD input selec-
tor and your TV must support ARC function.
Note
•TheAudio Return Channel” setting can be set only when the
HDMI Control (RIHD)” setting is set to “On”.
This setting is set to “Auto” automatically when the “HDMI
Control (RIHD)” is set to “On” first time.
Power Control
` Off:
Power Control disabled.
` On
:
Power Control enabled.
To link the power functions of p-compatible com-
ponents connected via HDMI, select “On”.
This setting is set to “On” automatically when the
HDMI Control (RIHD)” is set to “On” first time.
Note
•The
Power Control setting can be set only when the HDMI
Control (RIHD)
setting is set to “On”.
HDMI power control only works with p-compatible
components that support it and may not work properly with
some components due to their settings or compatibility.
When set to “On”, power consumption will increase.
When set to “On”, regardless of whether the AV receiver is On
or in Standby, both audio and video stream from an HDMI input
will be output to the TV or other components via HDMI connec-
tion (HDMI pass through function). When the HDMI pass
through function activates in standby mode, HDMI THRU indi-
cator will light.
The power consumption during standby mode will increase dur-
ing the HDMI pass through function; however if your TV sup-
ports CEC (Consumer Electronics Control), the power
consumption can be saved in the following cases:
1. The TV is in standby mode.
2. You are watching a TV program.
Refer to the connected component’s instruction manual for
details.
TV Control
` Off:
TV Control disabled.
` On
:
TV Control enabled.
Set to “On” when you want to control the AV receiver
from an p-compatible TV that is connected to
HDMI.
Note
Do not assign the component connected with the HDMI input to
the TV/CD selector when you setTV Control” setting to “On”.
Otherwise, appropriate CEC (Consumer Electronics Control)
operation is not guaranteed.
•Set to
Off when the TV is not compatible or when it is unclear
whether the TV is compatible or not.
•The
TV Control setting can be set only when the HDMI
Control (RIHD)
( 58) and Power Control( 59) set-
tings are both set to “On”.
Refer to the connected component’s instruction manual for
details.
Auto Power Down
Auto Power Down
` Off:
Auto Power Down disabled.
` On:
Auto Power Down enabled.
The AV receiver will automatically perform STANDBY
operation when “Auto Power Down” is set to
On, with
no audio or video signal input, and if there is no operation
for 30 minutes.
Auto Power Down” will display on the display and OSD
from 30 seconds before the Auto Power Down functions.
Default setting: On (European and Asian models), Off
(North American and Taiwan models)
Note
Depending on some sources, the auto power-down function may
activate during playback.
The Auto Power Down function does not work when Zone 2 or
Zone 3 is on.
Network
See “Network Settings” ( 69).
Firmware Update
Note
Perform the firmware update only when an announcement is
posted on the Onkyo web site. See the Onkyo web site for latest
information.
It takes about 30 minutes to complete the firmware update.
Version
The current version of the firmware is displayed.
Receiver
` via NET:
You can update the firmware via Internet. Check the
network connection before update.
` via USB:
You can update the firmware from a USB mass stor-
age device.
You can update the AV receiver’s firmware. Do not shut-
down the power of the AV receiver while update.
After changing the settings of the HDMI Control
(RIHD), Audio Return Channel, Power Control,
or
TV Control, turn off the power to all connected
pieces of equipment and then turn them on again. Refer
to the user’s manuals for all connected pieces of equip-
ment.
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-NR1008 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-NR1008 in the language / languages: English as an attachment in your email.

The manual is 4,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-NR1008

Onkyo TX-NR1008 User Manual - German - 204 pages

Onkyo TX-NR1008 User Manual - Dutch - 204 pages

Onkyo TX-NR1008 User Manual - French - 208 pages

Onkyo TX-NR1008 User Manual - Italian - 204 pages

Onkyo TX-NR1008 User Manual - Swedish - 204 pages

Onkyo TX-NR1008 User Manual - Spanish - 208 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info