Manual Onkyo TX-NR1008 (page 58 of 104) (English)

553762

Zoom out

Zoom in

1/104

Tuner

For FM/AM tuning to work properly, you must specify the

FM/AM frequency step used in your area. Note that when

this setting is changed, all radio presets will be deleted.

■ FM/AM Frequency Step (North American and

Taiwan models)

` 200kHz/10kHz

Select if 200 kHz/10 kHz steps are used in your area.

` 50kHz/9kHz:

Select if 50 kHz/9 kHz steps are used in your area.

■ AM Frequency Step (European and Asian

models)

` 10kHz:

Select if 10 kHz steps are used in your area.

` 9kHz:

Select if 9 kHz steps are used in your area.

SIRIUS Settings (North American models)

See the separate Satellite Radio Guide for more informa-

tion.

■ SAT Radio Mode

If you connect a SIRIUS Satellite Radio antenna to the

AV receiver (sold separately), set this setting to “SIR-

IUS”.

■ Antenna Aiming

■ SIRIUS Parental Lock

These items are for use with SIRIUS Satellite Radio.

It’s not available if “SAT Radio Mode” is set to

“None”.

HDMI

■ Audio TV Out

` Off

The audio is not output from the HDMI output.

` On:

The audio is output from the HDMI output.

This preference determines whether the incoming audio

signal is output from the HDMI output. You may want to

turn this preference on if your TV is connected to the

HDMI output and you want to listen to the audio from a

connected component through your TV’s speakers. Nor-

mally, this should be set to “Off”.

Note

• Listening mode cannot be changed when this setting is set to

“On” and the input source is not HDMI.

•If

“On” is selected and the audio can be output from the TV, the

AV receiver will output no sound through its speakers. In this

case, “TV Sp On” appears on the display.

• When

“TV Control” is set to “On”, this setting is fixed to

“Auto”.

• With some TVs and input signals, no sound may be output even

when this setting is set to

“On” (➔ 59).

• When the “Audio TV Out” setting is set to

“On”, or “TV Con-

trol” is set to

“On” (➔ 59) and you’re listening through your

TV’s speakers (➔ 18), if you turn up the AV receiver’s volume

control, the sound will be output by the AV receiver’s front left

and right speakers. To stop the AV receiver’s speakers producing

sound, change the settings, change your TV’s settings, or turn

down the AV receiver’s volume.

•If the “Monitor Out” setting is set to “Both(Main)” or

“Both(Sub)” (➔ 43) and if your TV connected to a priority out-

put cannot output the audio, the sound will be heard from AV

receiver’s speakers.

■ Lip Sync

` Disable

HDMI lip sync disabled.

` Enable:

HDMI lip sync enabled.

The AV receiver can be set to automatically correct any

delay between the video and the audio, based on the data

from the connected monitor.

Note

• This function works only if your HDMI-compatible TV supports

HDMI Lip Sync.

• You can check the amount of delay being applied by the HDMI

Lip Sync function on the A/V Sync screen.

•If the “Monitor Out” setting is set to “HDMI Main”,

“Both(Main)” or “Both” (➔ 43), the delay will be corrected in

accordance with the monitor connected to HDMI OUT MAIN.

On the other hand, if “HDMI Sub” or “Both(Sub)” is selected,

the delay will be corrected in accordance with the monitor con-

nected to HDMI OUT SUB.

■ HDMI Control (RIHD)

` Off

p disabled.

` On:

p enabled.

This function allows p-compatible components

connected via HDMI to be controlled with the AV receiver

(➔ 100 to 101).

Note

• When set to “On” and close the menu, the name of connected

p-compatible components and “RIHD On” are dis-

played on the AV receiver.

“Search…” → “(name)” → “RIHD On”

When the AV receiver cannot receive the name of the compo-

nent, it is displayed as “Player*” or “Recorder*”, etc (“*”

means the number of two or more component).

When set to “Off” and close the menu, “RIHD Off” are dis-

played on the AV receiver.

“Disconnect” → “RIHD Off”

•When an p-compatible component is connected to the

AV receiver via the HDMI cable, the name of the connected

component is displayed on the AV receiver display. For example,

while you are watching TV broadcasting, if you operate a

Blu-ray Disc/DVD player (being powered on) by the remote

control of the AV receiver, the name of the Blu-ray Disc/DVD

player is displayed on the AV receiver.

•Set to

“Off” when a connected piece of equipment is not com-

patible or it is unclear whether the equipment is compatible or

not.

• If movement is unnatural when set to

“On”, change the setting

“Off”.

• Refer to the connected component’s instruction manual for

details.

•The p control does not support HDMI OUT SUB. Use

HDMI OUT MAIN instead.

• When the source equipment is connected with the u connec-

tion, it may malfunction if “HDMI Control (RIHD)” is set to

“On”.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-NR1008 in the language / languages: English as an attachment in your email.

The manual is 4,41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-NR1008

Onkyo TX-NR1008 User Manual - German - 204 pages

Onkyo TX-NR1008 User Manual - Dutch - 204 pages

Onkyo TX-NR1008 User Manual - French - 208 pages

Onkyo TX-NR1008 User Manual - Italian - 204 pages

Onkyo TX-NR1008 User Manual - Swedish - 204 pages

Onkyo TX-NR1008 User Manual - Spanish - 208 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Onkyo TX-NR1008 Manual

Product: