645294
53
Zoom out
Zoom in
Previous page
1/63
Next page
53
Advanced Setup
—Continued
Using the Other Audio Adjust Functions
With the audio adjust functions you can tailor the sound
to your personal taste.
Before using the audio adjust functions, choose a lis-
tening mode first.
All of the audio adjust functions are explained below.
Mono In
With this function you can specify how 2-channel
sources are handled in the Mono listening mode.
L+R:
The front left and right speakers output a mono
mix of the left and right channels (default).
L:
The front left and right speakers output the sound
recorded in the left channel. Use this option with mate-
rial that has different languages recorded in the left and
right channels.
R:
The front left and right speakers output the sound
recorded in the right channel. Use this option with mate-
rial that has different languages recorded in the left and
right channels.
D. Bass (Double Bass)
The Double Bass function boosts the bass by feeding
bass sounds from the front left and right channels to the
subwoofer. To use this function, in the Speaker Configu-
ration, the Subwoofer setting must be set to Yes, and the
Front setting must be set to Lrg (see page 48).
On:
Double Bass function on.
Off:
Double Bass function off.
L. Night (Late Night) (Dolby Digital only)
This is the same as the Late Night function on page 44.
It can be used only with Dolby Digital listening mode.
Cine Flt (Cinema Filter)
This is the same as the CinemaFILTER function on
page 44. It can be used with the following listening
modes: Dolby Digital, Dolby Digital EX, Dolby Pro
Logic IIx Movie, DTS, DTS-ES, DTS Neo:6 Cinema,
DTS 96/24, DTS+Neo:6, and DTS+Dolby EX.
DTS Neo:6 Music Mode & Audio Adjust
This audio adjust function can be used with the DTS
Neo:6 Music listening mode.
C Image (Center Image)
The DTS Neo:6 Music listening mode creates 6-channel
surround sound from 2-channel (stereo) material. With
this function you can specify by how much the front left
and right channel output is attenuated in order to create
the center channel. It can be adjusted from 0 to 5 (default
3)
When set to 0, the front left and right channel output is
attenuated by half (–6 dB), giving the impression that the
sound is located centrally. This setting works well when
the listening position is considerably off center. When
set to 5, the front left and right channels are not attenu-
ated, maintaining the original stereo sound balance.
1
Press the REMOTE MODE [AMP]
button followed by the [SETUP]
button.
2
Use the Up and Down [ ]/[ ]
buttons to select “5. Audio Adj,
and then press [ENTER].
3
Use the Up and Down [ ]/[ ]
buttons to select an audio adjust
function, and then use the Left
and Right [ ]/[ ] buttons to
adjust it.
Note that the functions available
depends of the currently selected lis-
tening mode.
4
Press the [SETUP] button.
The setup menu closes.
AMP
TUNER
ENTER
ENTER
ENTER
TX-L55_En.book Page 53 Tuesday, June 1, 2004 9:02 AM
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-L55 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-L55 in the language / languages: English as an attachment in your email.

The manual is 4,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info