645294
61
Zoom out
Zoom in
Previous page
1/63
Next page
61
Troubleshooting
—Continued
Make sure that the TX-L55 is not subjected to direct
sunshine or inverter-type fluorescent lights. Relocate
if necessary.
If the TX-L55 is installed in a rack or cabinet with col-
ored-glass doors, the remote controller may not work
reliably when the doors are closed.
Make sure you’ve selected the correct remote control-
ler mode (page 11).
When using the remote controller to control other
manufacturers’ AV components, some buttons may
not work as expected.
Make sure you’ve entered the correct remote control
code.
Can’t control other components?
If it’s an Onkyo DVD player, make sure that the
cable and analog audio cable (RCA) are connected
properly. Connecting only an cable won’t work
(page 29).
Make sure you’ve selected the correct remote control-
ler mode (pages 11, 12, and 14).
Can’t record?
On your recorder, make sure the correct input is
selected.
Digital signals cannot be recorded.
The sound changes when I connect my head-
phones?
When a pair of headphones is connected, the listening
mode is set to Stereo, unless it’s already Stereo or
Direct. When you disconnect the headphones, the pre-
vious listening mode is resumed.
Can’t use an audio adjust function?
Some audio adjust functions can’t be used with certain
listening modes.
The speaker distance cannot be set as
required?
If the distance between the furthest and nearest speak-
ers is greater than 20 feet (6 meters), corrected values
suitable for home theater use will be set automatically
(page 50).
Recording
Others
The TX-L55 contains a microcomputer for signal pro-
cessing and control functions. In very rare situations,
severe interference, noise from an external source, or
static electricity may cause it to lockup. In the unlikely
event that this happens, unplug the power cord from the
wall outlet, wait at least five seconds, and then plug it
back in again.
To reset the TX-L55 to its factory defaults, turn it on and,
while holding down the [ ] TUNING button, press the
[STANDBY/ON] button. When the reset is complete,
“Clear” appears on the display and the TX-L55 enters
Standby mode.
Onkyo cannot be held responsible for damages (such
as CD rental fees) due to recording failures caused by
the unit malfunctioning. Before recording something
important, do a trial run to make sure that everything is
working properly.
Memory backup
The TX-L55 uses a battery-less memory backup sys-
tem in order to retain radio presets and other settings
when it’s unplugged or in the case of a power failure.
Although no batteries are required, it must be plugged
into an AC outlet in order to charge the backup system.
Once it has been charged, the TX-L55 will retain the
settings for several weeks, although this depends on
the environment and will be shorter in humid climates.
TX-L55_En.book Page 61 Tuesday, June 1, 2004 9:02 AM
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-L55 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-L55 in the language / languages: English as an attachment in your email.

The manual is 4,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info